Vacuum advance line for 65 289 2v Mustang

[David A]

I have a 65 Mustang with a 289 and Motorcraft 2 barrel. I need a new vacuum advance line from the distributor to the carb but all the ones I see available have a threaded connection at both ends. Can I just cut the line that goes in the carb port and use a rubber hose to push on to the port since it is the only thing that will fit. Thanks so very much.

 

[horse sence]

Yes you can cut it and use a rubber hose to connect it

 

[David A]

Yes you can cut it and use a rubber hose to connect it

Thanks I thought so. I’ve not seen a threaded timed port on a 2100 autolight carb anyway