valve cover gaskets dont fit

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Jan 24, 2010

#1

• Jan 24, 2010

• #1

I bought these gaskets from rock auto fel pro VS 50481R box says 4.9 L 2003-1996

here is a link to autozone with the same part number. there are 13 holes for the grommets
shouldnt it be 11 ? or do I not use some of em?

AutoZone.com | Search Results for valve cover gasket

 

M

Midnight2V

Member

Jan 30, 2009

224

0

16

Oklahoma

Jan 24, 2010

#2

• Jan 24, 2010

• #2

welcome to the wonderful world of romeo/windsor 4.6 differences. One assembly plant uses 13 bolt cam covers, one plant uses 11 bolt covers. I think the windsor is 13 and the romeo is 11. It could be vice versa though.

 

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Jan 24, 2010

#3

• Jan 24, 2010

• #3

well if you look at the listing from autozone or for anywhere else for that matter vs50481r says its for a 96 4,6L vin X.could it be a mis label from fel pro?

and then to make it even weirder on the box I have it says 4.6L 2003-1996 but it doesnt give a vin code on the box,however correct me if im wrong but they only made the windsor motors from 1999 to 2000. and also Im counting 14 grommet holes in the gaskets not 13 as I originally wrote. do I trim any off?

I may just end up using the old ones,and hoping they dont leak.the old ones were just a ribbon with no grommet holes.

 

patman0911

Founding Member

Jun 5, 2002

2,287

0

46

Tuscaloosa, AL

Jan 24, 2010

#4

• Jan 24, 2010

• #4

Windsors were only put in Mustangs those couple of years but Ford's been putting them in trucks all along.

Those gaskets won't work. Either order the right ones without any grommets or reuse your old ones. Your old ones are probably fine to reuse if they're still in one piece and don't have any serious tears in them.

If you have trouble getting them to stay in place while installing the valve covers, put a thin bead of RTV in the gasket channel in the covers - just enough to hold the gaskets in place - and install the gaskets and let it cure.

 

GDawg

Founding Member

Mar 22, 2002

1,469

19

68

Nevada

Jan 25, 2010

#5

• Jan 25, 2010

• #5

Is that a typo...? We have 4.6L engines not 4.9L... (First post)

 

R

rockyracoon

10 Year Member

Nov 23, 2005

874

27

49

margate NJ

Jan 25, 2010

#6

• Jan 25, 2010

• #6

yes,sorry a typo