Valve covers
#5
They won't clear with a 3/8" spacer, you will need a much thicker spacer and you may still have VC clearance issues. The best bet IMO is the short VC's from Trick Flow. I'm running them with my Probe Shaft mount rockers and they cleared everything just fine, including the alternator. I am running a thick fel pro VC gasket though too for added clearance. I didn't check them without this thick gasket to see if it was needed or not, I just used it to be safe as i used it with my old stock VC's.
 
#6
I had moroso fabricated valve covers and i sold it on ebay for $80 bucks today. I am pretty mad about it since i paid so much for it. And some guy from canada bought it even though i said i don't ship it there.

If anyone wants this let me know. i rather sell it to stangnet member! "UGH" I hate ebay!!!

Yes it was one of those aluminum nice one's not the steel ones. :UGH!!!
 
#7

Send me a picture
blindfoldedhope@yahoo.com
 
#11
Both Canaries agree, the low profile Trick Flow valve covers are the way to go. You can pick up a pair pretty cheap on ebay. I'm running stud rockers with a standard VC gasket, no issues, and no spacers. I had to clearance the bottom of my Systemax 2 intake just a tad.

Kurt
 
You must log in or register to reply here.

Similar threads

SOLD Ford Racing tall chrome Etched Valve Covers M-6582-LE302C
Replies
0
Views
203
Other Classifieds
lenko
Holly sniper valve covers
Replies
3
Views
624
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
85GTStangGuy
Engine Valve Cover Help
Replies
4
Views
2K
1994 - 1995 Specific Tech
Labora
C4 Transmission Servo cover leak
Replies
1
Views
210
1965 - 1973 Classic Mustangs -General/Talk-
Realmongo
Resolved Coolant blowing out of valve cover??
Replies
19
Views
2K
Fox 5.0 Mustang Tech
sav22rem22
Menu
Log in
Register