• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Vibrating clutch pedal after new clutch

  • Thread starter Thread starter 2013 Geee T
  • Start date Start date May 9, 2009

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 9, 2009
#1
  • May 9, 2009
  • #1
I had my clutch replaced and flywheel resurfaced but now when Im driving in gear with my foot off the clutch the pedal will vibrate. Sometimes it does it enough where I can actually hear it. One person told me it could be that the tabs on the pressure plate are uneven. Any thing else it could be? I think Im going to have to take it back to be looked at but was wondering what it could be.
 
S

schoffs4

New Member
Mar 6, 2009
17
0
0
May 9, 2009
#2
  • May 9, 2009
  • #2
is it chattering while letting clutch out? seen lots of guys over tighten press plate and not tighten bolts evenly, hanging trans on clutch before bolting trans to motor. sounds like trans got to come out again
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 9, 2009
#3
  • May 9, 2009
  • #3
Its fine when letting the clutch out, no chattering.
 

BlackenedSVT

Active Member
Jan 18, 2004
1,841
7
38
New Jersey
www.cardomain.com
May 10, 2009
#4
  • May 10, 2009
  • #4
Seems kinda dumb but, was the Throw Out Bearing replaced too and the pilot bearing? Or are both of those still the old ones?

...because you should have replaced them with the clutch
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 10, 2009
#5
  • May 10, 2009
  • #5
Yes they were replaced. The only reason I even had it done was because the TO bearing was making so much noise it was driving me nuts so I figured I would have the clutch done while the trans was out.
 

squeak93

15 Year Member
Jun 2, 2005
2,296
377
164
Joplin, Missouri
May 12, 2009
#6
  • May 12, 2009
  • #6
Its very possible to get a bad tob brand new.... It sounds to me as if your tob is bad as that is the exact symptom of what mine was just before we replaced the clutch. You'd engage it and be driving just to have the pedal doing to truffle shuffle under your feet. Mine was bad enough you could hear the banging over the stereo.

Where did you get the tob from? did you put a metal one in not those plastic pos' that come with most kits now a days?
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
May 12, 2009
#7
  • May 12, 2009
  • #7
Dowel pins reinstalled into the flywheel?
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 13, 2009
#8
  • May 13, 2009
  • #8
The dealer did the work so its all Ford parts. Im taking it back tomorrow for them to look at and if they have to redo it then thats the way it goes I suppose.
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 14, 2009
#9
  • May 14, 2009
  • #9
So the guy who did the clutch test drove my car today and said the vibration was nothing and thought it was fine which is what I thought he would say. It didn't do the serious vibrating like it does randomly until I was driving home later. You can actually hear the pedal vibrating at certain times. It seems to do it more at lower RPMs and with my foot off the gas.

It has a 12 month/12000 mile warranty on it so at least I got it documented so if it gets worse or blows I can say I told you so.
 

squeak93

15 Year Member
Jun 2, 2005
2,296
377
164
Joplin, Missouri
May 15, 2009
#10
  • May 15, 2009
  • #10
I still say a faulty tob. And they prob won't do chit b/c its on their dime now and will keep blowing you off......

I had a ford dealer tell me a 20k trans was supposed to grind and that it was normal.
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
May 16, 2009
#11
  • May 16, 2009
  • #11
I think you are right about the TOB. It makes a little noise when it neutral with my foot off the clutch like it did before with the old noisy TOB. Now the pedal vibrates a lot more when my foot is off it, especially at 1500 RPM. Today when I put it in neutral and took my foot off the clutch it even vibrated then.

Now my differential is leaking oil so I wonder if they could have done something to cause that?
 

86turbo

Member
Apr 8, 2006
183
0
17
Jun 5, 2009
#12
  • Jun 5, 2009
  • #12
I found that there was a little play in my cable and was getting the vibrating pedal also. I tightened up the cable using my fwa and the pedal doesn't vibrate anymore
 

2013 Geee T

Founding Member
Sep 25, 2002
805
5
19
Oak Park, CA
www.onlinecomputertips.com
Jun 5, 2009
#13
  • Jun 5, 2009
  • #13
It turns out that the TOB had some play in it so they had to pull it apart and replace it again. Now its good as new.
 
4

4tun8

New Member
May 1, 2006
172
0
0
Classified
Jun 6, 2009
#14
  • Jun 6, 2009
  • #14
My guess would be a bad quadrant. Stock one is junk. Get 555kit1 from CJ Pony Parts.
 
You must log in or register to reply here.

Similar threads

T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
151
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
Clutch pedal to Quadrant lag
  • Potomus Pete
  • Aug 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
247
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
Noobz347
L
2006 mustang gt has high clutch bite
  • leevikisley
  • Feb 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
228
2005 - 2009 Specific Tech Feb 22, 2026
leevikisley
L
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
216
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
Drivetrain Sticky clutch pedal
  • keel
  • Jul 31, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
911
Fox 5.0 Mustang Tech Oct 17, 2025
Mindseye007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?