vibration from motor

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
i hope someone can help me out on this problem. this problem started last year. When i first start my car up the motor idles fine (about 950RPM), but if i give it a little bit of gas (around 1300-1700 RPM) i get a very bad vibration problem. when i drive the car i dont feel the vibration at all, but i'm thinking it still there, but due to the fact that its at a higher RPM its just not as noticable. when i come to a stop light/sign, again i will not fell the heavy vibration feeling till the RPM's get to around 1500 RPM, and then it goes away when it come to a idle. The only thing that i can think of would be either the damper or flywheel not balanced(could they become unbalanced?:shrug: ). the damper is not the stock one, but a good aftermarket one i bought. please look at my link below to see all that is done to the motor.

i dont really drive the car that much just on the weekend. the plugs and wires have about 4K miles on them. i did put a new cap and rotor on just a few weeks ago.

any help would be great.
 
I'm with you on the damper man. Could also be flywheel and/or clutch assembly loose or out of balance. Since it's a weekend car, it won't put you out much to tear it down and take a look. Maybe start by putting a stock balancer on there to see if it cures it.

If it's the flywheel/clutch assy., you likely never actually SEE the problem. Just taking it all apart and putting it back together correctly solves it most of the time. Just for peace of mind though... check around to shoppes in your area and see if there's one out there that can balance a flywheel/clutch assy.

The specificness of your description leads me to believe that your vibration is a harmonic one. Just changing the way things line up between the rotating assy, balancer, and flywheel, can allot of times cure problems like these. That's what sucks about the whole thing... You may end up fixing it and never know what the hell it was in the first place.

Good Luck.
 
i'm hopeing that its not the balancer due to the fact that its a pain to get to with the blower, plus i dont like working, and dont have the paitence anymore to work on the car to pull it apart. i did put a new clutch in around 15-20K miles ago, but i dont remember if i put in a new flywheel in at the same time. i have a feeling its the damper, but i hope it could be something else that would be easy to fix. my only other thought would be the MSD box going bad, but thats just a guess.
 
Given the range of the miss/vibes, you might be able to get a CBT to show something (if it is indeed a cylnder misfire issue).

Good luck.
 
Cylinder Balance Test. It dynamically checks each cylinder's contribution. It's part of the code pulling process.
 
Had simmilar problem, vibration at 1000-1200 rpm but none at idle or above 4500rpm. It got worse and eventually you could feel it across the board just the worst at 1000rpm.

Turned out the balancer was thrown 90deg off... try turning the motor over until you hit TDC and look to see if your at 0deg... i bet you threw your balancer a little.
 
postalbunny said:
Had simmilar problem, vibration at 1000-1200 rpm but none at idle or above 4500rpm. It got worse and eventually you could feel it across the board just the worst at 1000rpm.

Turned out the balancer was thrown 90deg off... try turning the motor over until you hit TDC and look to see if your at 0deg... i bet you threw your balancer a little.

problem is the timmer marker is scratch off. the metal pointer some how got bent a few years back and took off the numbers.

i would guess if the balancer was off like yours was, it would be time for a new one? am i correct?

i'm leaning towards it being the balancer being the problem.