• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

vibration from motor

  • Thread starter Thread starter flyinghi3
  • Start date Start date Jun 2, 2006

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
Jun 2, 2006
#1
  • Jun 2, 2006
  • #1
i hope someone can help me out on this problem. this problem started last year. When i first start my car up the motor idles fine (about 950RPM), but if i give it a little bit of gas (around 1300-1700 RPM) i get a very bad vibration problem. when i drive the car i dont feel the vibration at all, but i'm thinking it still there, but due to the fact that its at a higher RPM its just not as noticable. when i come to a stop light/sign, again i will not fell the heavy vibration feeling till the RPM's get to around 1500 RPM, and then it goes away when it come to a idle. The only thing that i can think of would be either the damper or flywheel not balanced(could they become unbalanced? ). the damper is not the stock one, but a good aftermarket one i bought. please look at my link below to see all that is done to the motor.

i dont really drive the car that much just on the weekend. the plugs and wires have about 4K miles on them. i did put a new cap and rotor on just a few weeks ago.

any help would be great.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 2, 2006
#2
  • Jun 2, 2006
  • #2
I'm with you on the damper man. Could also be flywheel and/or clutch assembly loose or out of balance. Since it's a weekend car, it won't put you out much to tear it down and take a look. Maybe start by putting a stock balancer on there to see if it cures it.

If it's the flywheel/clutch assy., you likely never actually SEE the problem. Just taking it all apart and putting it back together correctly solves it most of the time. Just for peace of mind though... check around to shoppes in your area and see if there's one out there that can balance a flywheel/clutch assy.

The specificness of your description leads me to believe that your vibration is a harmonic one. Just changing the way things line up between the rotating assy, balancer, and flywheel, can allot of times cure problems like these. That's what sucks about the whole thing... You may end up fixing it and never know what the hell it was in the first place.

Good Luck.
 

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
Jun 2, 2006
#3
  • Jun 2, 2006
  • #3
i'm hopeing that its not the balancer due to the fact that its a pain to get to with the blower, plus i dont like working, and dont have the paitence anymore to work on the car to pull it apart. i did put a new clutch in around 15-20K miles ago, but i dont remember if i put in a new flywheel in at the same time. i have a feeling its the damper, but i hope it could be something else that would be easy to fix. my only other thought would be the MSD box going bad, but thats just a guess.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 2, 2006
#4
  • Jun 2, 2006
  • #4
Given the range of the miss/vibes, you might be able to get a CBT to show something (if it is indeed a cylnder misfire issue).

Good luck.
 

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
Jun 2, 2006
#5
  • Jun 2, 2006
  • #5
HISSIN50 said:
Given the range of the miss/vibes, you might be able to get a CBT to show something (if it is indeed a cylnder misfire issue).

Good luck.
Click to expand...


CBT-?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 2, 2006
#6
  • Jun 2, 2006
  • #6
Cylinder Balance Test. It dynamically checks each cylinder's contribution. It's part of the code pulling process.
 
P

postalbunny

Member
Oct 26, 2005
118
0
17
Jun 2, 2006
#7
  • Jun 2, 2006
  • #7
Had simmilar problem, vibration at 1000-1200 rpm but none at idle or above 4500rpm. It got worse and eventually you could feel it across the board just the worst at 1000rpm.

Turned out the balancer was thrown 90deg off... try turning the motor over until you hit TDC and look to see if your at 0deg... i bet you threw your balancer a little.
 

flyinghi3

Member
Jan 11, 2003
313
0
17
Manorville, LI
Jun 2, 2006
#8
  • Jun 2, 2006
  • #8
postalbunny said:
Had simmilar problem, vibration at 1000-1200 rpm but none at idle or above 4500rpm. It got worse and eventually you could feel it across the board just the worst at 1000rpm.

Turned out the balancer was thrown 90deg off... try turning the motor over until you hit TDC and look to see if your at 0deg... i bet you threw your balancer a little.
Click to expand...

problem is the timmer marker is scratch off. the metal pointer some how got bent a few years back and took off the numbers.

i would guess if the balancer was off like yours was, it would be time for a new one? am i correct?

i'm leaning towards it being the balancer being the problem.
 

Beasly B

New Member
Jan 7, 2006
165
0
0
Virginia
Jun 2, 2006
#9
  • Jun 2, 2006
  • #9
I also had balancer problems on the original motor that was in my car it vibrated and at idle you could watch the balancer wobble, that's how I found out my problem.
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
749
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
339
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
B
Acceleration Vibration
  • Blown02svt
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
826
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 5, 2026
General karthief
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
386
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
173
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?