Vortech Owners w/ Autometer Oil Pressure Gauge....Question!

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Jan 8, 2004

#1

• Jan 8, 2004

• #1

My mechanic took my car in today to check for some oil leaks up the lift. While it was there, I had him install the sending unit for the OP gauge. The Mustang shop that did the Vortech install removed the stock OP gauge, connected a fitting to the location, and put the oil line for the vortech in the near side of the fitting, and the stock OP gauge just after that.

Today, when the mechinic put in the Autometer, he said there is barely a mm of clearance.

QUESTION:
I wanted to know how you have the oil line hooked up in reference to the sending unit on the AUtometer gauge, and if anyone has the stock AND Autometer hooked up.?? Also any fitment issues?

Thanks
RC

 

S/CBlack95GT

New Member

Apr 6, 2003

2,018

0

0

Tampa Palms, FL

Jan 8, 2004

#2

• Jan 8, 2004

• #2

I remote located my Autometer sender to the passenger side of the engine bay right next to the blower. The Autometer sender is too big to fit so I ran a braided line from the fitting to the sender. This is the best way and the sender will last much longer. I can post pics if you want.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Jan 8, 2004

#3

• Jan 8, 2004

• #3

Yes, a pic would be nice....
Thanks
RC

 

str8stang036

New Member

Dec 28, 2002

1,382

0

0

Miami

Jan 8, 2004

#4

• Jan 8, 2004

• #4

He probably took the 45* fitting out and thats why he can barely make it fit. I remember you had the 45 before, and the stock sender was connected to that. Since the stock sender is 2 times smaller than the autometer sender it fit, but it would bump the p/s bracket because its bigger. Your going to have to move that 45 around to make it fit right. Ask your mechanic if he took out the 45. We could have done it over the weekend man.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

Jan 8, 2004

#5

• Jan 8, 2004

• #5

str8stang036 said:

He probably took the 45* fitting out and thats why he can barely make it fit. I remember you had the 45 before, and the stock sender was connected to that. Since the stock sender is 2 times smaller than the autometer sender it fit, but it would bump the p/s bracket because its bigger. Your going to have to move that 45 around to make it fit right. Ask your mechanic if he took out the 45. We could have done it over the weekend man.

Click to expand...

I like Shaun's idea though.

I guess you could put a fitting with an extra opening to connect the stock one to, then use the extra opening to run a braided line to hook up the Autometer one?

RC

 

S/CBlack95GT

New Member

Apr 6, 2003

2,018

0

0

Tampa Palms, FL

Jan 8, 2004

#6

• Jan 8, 2004

• #6

Woah..it was kinda tight getting the camera in there for these shots, but here you go.

Here you can see the blower feed line going up and the Autometer braided line curling down under the engine.
<img src="http://www.mustangmods.com/data/393/p1080969sn.jpg">

This is how I ran it under the engine.
<img src="http://www.mustangmods.com/data/393/p1080971sn.jpg">

Then finally here is the Autometer sender hiding under the blower and the bypass.
<img src="http://www.mustangmods.com/data/393/p1080972sn.jpg">

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says &quot;here it comes... dushbag&quot;

Jan 9, 2004

#7

• Jan 9, 2004

• #7

Thanks Shaun :worship:

Im assuming your stock OP gauge is disconnected?
RC

 

VibrantRedGT

"STANGNET'S PENGUIN SMACKER"

15 Year Member

Nov 29, 1999

14,679

424

154

Boca Raton, Florida

Jan 9, 2004

#8

• Jan 9, 2004

• #8

94GTLaserRC said:

QUESION:
Thanks
RC

Click to expand...

What the hell does that say?

 

S/CBlack95GT

New Member

Apr 6, 2003

2,018

0

0

Tampa Palms, FL

Jan 9, 2004

#9

• Jan 9, 2004

• #9

94GTLaserRC said:

Thanks Shaun :worship:

Im assuming your stock OP gauge is disconnected?
RC

Click to expand...

Yea it is for now. I may plumb it and the water temp gauge back up sometime. It seems to be more of a hassle than what it is worth though. The factory gauges are more like indiot lights than anything.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says &quot;here it comes... dushbag&quot;

Jan 9, 2004

#10

• Jan 9, 2004

• #10

VibrantRedGT said:

What the hell does that say?

Click to expand...

You busted me Joe...I was imitating Seth!

RC

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says &quot;here it comes... dushbag&quot;

Jan 9, 2004

#11

• Jan 9, 2004

• #11

S/CBlack95GT said:

Yea it is for now. I may plumb it and the water temp gauge back up sometime. It seems to be more of a hassle than what it is worth though. The factory gauges are more like indiot lights than anything.

Click to expand...

Thanks Shaun!
RC

 

GTWayne

Founding Member

Nov 7, 2002

161

0

0

Albuquerque, NM

Jan 9, 2004

#12

• Jan 9, 2004

• #12

Vortech w/Autometer oil press gauge

I must be the real oddball here and it must be due to my old pipefitter back ground.
I fabricated a plumbing tree that mounted the Vortech supplied fittings, Stock sender and Autometer sender. I'd send pictures but our digital camera was stolen along with many other things when we were robbed on Wednesday.

The got my new Dell laptop, camera, DVD player, entire DVD collection, money, credit cards, and worst of all my wife and I's custom Target/Varmint rifles. I just got hers for Christmas and she hasn't even been to the range to shoot it yet!!!!

Wayne

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says &quot;here it comes... dushbag&quot;

Jan 9, 2004

#13

• Jan 9, 2004

• #13

I just connected the sending wire to the Gauge. What should the Oil pressure be reading?

RC

 

str8stang036

New Member

Dec 28, 2002

1,382

0

0

Miami

Jan 9, 2004

#14

• Jan 9, 2004

• #14

Mine usually reads like 25 or so at idle and like 50 or so when driving.