Wanna go for a ride in my car?

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 26, 2006

#1

• Aug 26, 2006

• #1

How about two?

I was having some fun last weekend and recorded these two vids, enjoy!

http://www.mustangaddiction.com/movies/run1.wmv
http://www.mustangaddiction.com/movies/run2.wmv

 

91LX_5L

Founding Member

May 13, 2002

1,943

0

36

British Columbia

Aug 26, 2006

#2

• Aug 26, 2006

• #2

That was fun....I could almost feel the G's here in my computer chair

 

1TallMF

New Member

Apr 17, 2006

955

1

0

Montreal

Aug 26, 2006

#3

• Aug 26, 2006

• #3

sick, man, just sick

 

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

Aug 26, 2006

#4

• Aug 26, 2006

• #4

I rode in your car already that second ride was scary lol

 

Nik_95Cobra

Founding Member

Feb 5, 2002

1,677

1

37

Tempe, Arizona

Aug 27, 2006

#5

• Aug 27, 2006

• #5

that rocks man

 

JJ95GTID

Active Member

Sep 22, 2003

1,141

4

49

Phoenix, AZ

Aug 27, 2006

#6

• Aug 27, 2006

• #6

Love the sound of the engine.

Thanks man.

 

urban96

bubb rubb says:"woo woooooo"

Founding Member

Sep 24, 2002

3,464

1

69

Syracuse, NY

Aug 27, 2006

#7

• Aug 27, 2006

• #7

wheelspin

 

Mustangless

Member

Jun 27, 2003

903

1

18

home

Aug 27, 2006

#8

• Aug 27, 2006

• #8

wow, your car looks pretty fast. Every taken it to the track?

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Aug 27, 2006

#9

• Aug 27, 2006

• #9

Sweet... Sounds to me like its breaking up in the top of 3rd?

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 27, 2006

#10

• Aug 27, 2006

• #10

urban96 said:

wheelspin

Click to expand...

Nope, havn't been to the track yet. Im gonna try to make a trip there sometime this year...

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 27, 2006

#11

• Aug 27, 2006

• #11

RIO5.0 said:

Sweet... Sounds to me like its breaking up in the top of 3rd?

Click to expand...

Yeah, it's kind of an intermittent problem that's started recently. I'll be working on that this week. Any suggestions?

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Aug 27, 2006

#12

• Aug 27, 2006

• #12

Low-5.0 said:

Yeah, it's kind of an intermittent problem that's started recently. I'll be working on that this week. Any suggestions?

Click to expand...

Man thats a wide open question... I would be doing a full tune unless you had one recently...I would throw some fresh plugs for starters and see how it responds and go from there...Whats the gap??
It sounded like the top on 2nd was doing it to but 3rd was more pronounced...Hows the ignition system, wires and such age wise?? Hows the cap and rotor look?? arc'd or carbon fouled??
Not knowing youe mods I would ask where the FP?? is it starving up top??
If it just started recently it could be just tune time?? Wheres the timing?? How many miles on the dizzy?? It could be getting sloppy and floating when the revs are up??
I start with the basics myself and pic away at it...

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 28, 2006

#13

• Aug 28, 2006

• #13

It's the top of any gear really, it did it on the dyno saturday too, at around 5900 rpms. The wires have maybe 600 miles on them(Taylor 409's), and I just changed the plugs about a month ago. They're gapped at .45.....Hmmm....That's about when this started so maybe I should change back to my old plugs...
Cap and rotor look good, MSD dizzy has around 1600 miles on it. FP is stock, and my dyno run back in April showed A/F to be between 12-13 all the way up to 6200.

First thing Im gonna do is replace the coil, and fix the ground wire to my Crane ignition box.

 

RIO5.0

15 Year Member

Feb 16, 2001

6,892

8

128

N.H.

Aug 28, 2006

#14

• Aug 28, 2006

• #14

Why 45 on the gap?...I used to run em at 54 on the stock ignition...I would def open them up and see what gives...and then your ground issue could be valid?? Coils very rarely go bad from my what I've seen over the years..

I have bout the same parts, but run the PD igniton set-up and gap mine at 60.
Try some NGK UR45 V-Grooves..Been running em for 4 yrs now and never an issue..
Let me know how it pans out...

 

Y

yellow1995Cobra

New Member

Dec 23, 2002

2,959

2

0

Massachusetts

Aug 28, 2006

#15

• Aug 28, 2006

• #15

badass bro!

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 28, 2006

#16

• Aug 28, 2006

• #16

I went with .45 on the gap because that's what was reccommended in the Crane instruction manual. It felt like it made more power when I had them gapped at .54 so Im gonna go back to that or higher when I get a chance.

 

WhiteDevil

New Member

Feb 4, 2003

2,717

0

0

San Diego

Aug 29, 2006

#17

• Aug 29, 2006

• #17

damn that was a nice vid man. If you could get traction in 1st you would probably need to drive with a colostomy bag!

 

94GTMOOSE

Member

Jun 27, 2005

303

0

16

jersey shore

Aug 29, 2006

#18

• Aug 29, 2006

• #18

dangerous, and reckless, i still got wood...i give it a 9.5. lets see some vids from out side the car.

 

Blackened302

Active Member

Jul 21, 2005

1,439

0

36

South TX

Aug 29, 2006

#19

• Aug 29, 2006

• #19

damn, your car is/sounds badass, mike!!

 

1slow95

Founding Member

May 16, 2002

1,797

3

48

ohio

Aug 29, 2006

#20

• Aug 29, 2006

• #20

The only outside vids I have right now are a couple dyno runs and a burnout.