Hey all. I am currently running a Mishimoto alum radiator and dual fan setup. My car has always had problems with running hot. The t-stat and temp sensors are fine. Its been burped and burped again and again. It will heat up to about 190 pretty quick, and just kinda jump around between 190 and 225 while cruising locally or on the highway and this is within 15 mins. Doesn't seem to matter either way. I put it in 5th gear on highway and it will slowly start to creep back down oddly enough.
A little while back my water pump took a dump so I replaced it, with a stock one. I'm starting to wonder if it originally had a high flow or something on it since it seems to run hotter now, even with the alum rad and elec fans.
The only other option I have is to switch back to a stock size water pump pulley instead of the modded one.
Any suggestions on a good high flow water pump for around 200 bucks or less?
I have been looking at Jegs and the Edelbrock Victor series ones, but am unclear if those really flow any better than stock.
Anyone use these?
Any other suggestions?
Thanks!!
A little while back my water pump took a dump so I replaced it, with a stock one. I'm starting to wonder if it originally had a high flow or something on it since it seems to run hotter now, even with the alum rad and elec fans.
The only other option I have is to switch back to a stock size water pump pulley instead of the modded one.
Any suggestions on a good high flow water pump for around 200 bucks or less?
I have been looking at Jegs and the Edelbrock Victor series ones, but am unclear if those really flow any better than stock.
Anyone use these?
Any other suggestions?
Thanks!!


