• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Water Pump Went Out And Now Motor Makes Noise

  • Thread starter Thread starter MATHEW2172
  • Start date Start date Oct 17, 2016
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 17, 2016
#1
  • Oct 17, 2016
  • #1
Well my kid bought a 1992 gt. on the way home the water pump went out the motor starting making a light knocking/ tapping sound. We had it towed home and replaced the water pump, after replacing the water pump we started it back up and it is still making that noise. We also discovered the thermostat needed replacing. That is on the list for tonight. Do you think it has real damage?? The motor ran perfect till the thermostat ran out.
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Oct 17, 2016
#2
  • Oct 17, 2016
  • #2
Check the crank pulley bolts and make sure they are tight, and check the balancer as well.
 

Mstng93SSP

You have a nice rear end there Dave.
15 Year Member
Nov 29, 1999
2,993
3,500
184
Mililani, Hawaii
Oct 17, 2016
#3
  • Oct 17, 2016
  • #3
Any chance you could throw a video of the sound up on youtube so we could hear it?
 
Reactions: MATHEW2172
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 17, 2016
#4
  • Oct 17, 2016
  • #4
I will be replacing the thermostat tonight, but should i let it set up overnight before i run it?
 

Moosee1955

Active Member
Sep 30, 2016
267
55
38
71
Oct 17, 2016
#5
  • Oct 17, 2016
  • #5
How bad did it overheat? Usually v8's recover but not always. Was it low on oil, as well as overheating cooling system? 5.0 motors Are pretty tough, get cooling system right, change oil and filter, observe oil/ filter for any metal. You might cut open filter, or get a auto paint filter, and pour some through filter, see if anything shiny. Check water pump, make sure that's not your knock. They might be related because of overheating !


Sent from my iPhone using Tapatalk
 

Knowbody

Member
Sep 4, 2016
35
26
18
47
TEXAS
Oct 17, 2016
#6
  • Oct 17, 2016
  • #6
Take the serpentine belt off , start it up, and see if the noise is still there. That will eliminate anything that runs off the belt as a culprit. If the noise is still thee, it's time to start looking inside the engine to find the damage, burnt valve, scored cylinder, damaged bearing, stuck lifter, etc.
 
Reactions: Mstng93SSP
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#7
  • Oct 18, 2016
  • #7
Yea its internal..... I am having it looked at by a auto mechanic today. Afraid for the worse. Its to bad this kid saved for a summer to buy this car!
 
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#8
  • Oct 18, 2016
  • #8
I did take a video but dont know how to load it. I am gonna go explore that option right now
 
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#9
  • Oct 18, 2016
  • #9
 

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Oct 18, 2016
#10
  • Oct 18, 2016
  • #10
Sounds like a rocker arm/valvetrain noise.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 18, 2016
#11
  • Oct 18, 2016
  • #11
A5literMan said:
Sounds like a rocker arm/valvetrain noise.
Click to expand...
Agreed. Not the bottom end. I would pull the valve covers.
 
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#12
  • Oct 18, 2016
  • #12
Mechanic just called. He is gonna pull the valve covers off. He thinks rockers
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Oct 18, 2016
#13
  • Oct 18, 2016
  • #13
MATHEW2172 said:
Mechanic just called. He is gonna pull the valve covers off. He thinks rockers
Click to expand...
For record, several of us will diagnose for beer. No need for a shop.
 
Reactions: A5literMan, Davedacarpainter, TOOLOW91 and 2 others
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#14
  • Oct 18, 2016
  • #14
Who lives in OMaha. I can contribute beer!
 
M

MATHEW2172

Member
Oct 17, 2016
26
5
13
53
Oct 18, 2016
#15
  • Oct 18, 2016
  • #15
The kids wants to build a 351 next summer for it. I got lots of beer if people want to help! haha
 

Moosee1955

Active Member
Sep 30, 2016
267
55
38
71
Oct 18, 2016
#16
  • Oct 18, 2016
  • #16
I just played through speakers of my ecpedition. I agree with the gang, top end. You might have gotten lucky.keep us posted, send pics of damage if possible. If it was lower end, much deeper.


Sent from my iPhone using Tapatalk
 

deathb4dismount

Crap, didn’t realize my crotch was in that picture
15 Year Member
Oct 6, 2011
1,031
502
164
THE BUCKET
Oct 18, 2016
#17
  • Oct 18, 2016
  • #17
if you haven't checked the crank pulley bolts do it before you open valve covers. It sounds very similar to valve train noise. Mine backed out because I had a bad balancer. If I can find my video I will post it for you to compare.
 

General karthief

wonder how much it would cost to ship you a pair
20+ Year Stangneter
Aug 25, 2016
27,947
10,585
203
polk county florida
Oct 19, 2016
#18
  • Oct 19, 2016
  • #18
Well this proves it. New thread, more beer!
 
Reactions: Davedacarpainter

Moosee1955

Active Member
Sep 30, 2016
267
55
38
71
Oct 19, 2016
#19
  • Oct 19, 2016
  • #19
Good call, hadn't thought about that. I had a Harley twin cam in my rental shop years back that had what sounded like a failed top end. The young tech was ready to tear into it. I had one a month before that had same ticking. We pulled primary cover, and sure enough the compensating nut came loose. We tightened nut, and noise disappeared. Hopefully that's your problem. Let us know.


Sent from my iPhone using Tapatalk
 

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Oct 19, 2016
#20
  • Oct 19, 2016
  • #20
stykthyn said:
For record, several of us will diagnose for beer. No need for a shop.
Click to expand...
edit:deleted post
 
  • 1
  • 2
  • 3
Next
1 of 3 Next Last
You must log in or register to reply here.

Similar threads

K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
101
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
310
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
208
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
923
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Engine Popping noise in the intake. Frustrated still.
  • esteban31065
  • Apr 6, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech May 23, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?