Weird Accident....Need Help With Repairs

lovinspeed

New Member
Aug 17, 2006
13
0
0
Ok, so I took my weekend toy out yeaterday....91 5.0 notch, My girlfriend and I went to get some ice cream. While we were getting ice cream, some punk stole my hood pins. We got in the car, both not noticing that the pins were gone. So I pull out and gun it. Next thing I know, the hood smacks the windshield....

So now I am stuck trying to fix the damage. The damage includes;

Fiberglass hood - fiberglass ripped off at back hinges on the underside of the hood....no paint damage though.

Piece between hood and windshield - crumped like a tin can

Roof - Two dents just above the windshield

My questions are.....Can you fuse fiberglass back together, or is the hood garbage? How easy is it to take the dents out of the roof, without having to repaint? Can the piece between the hood and the windshield be pounded out? Do I have anyother cheap options for this piece?

Thank you for any help
 
ShortThrow50 said:
I wish i could be all i wanted to see is that , that is a real shame what lengths young punks go to theses days to piss on someone elses parade.
Huh?

I had my hood flip on my old Fox. Can't tell ya if the fiberglass can be fixed, but I'd rather pick up a new hood if that one got damaged enough to rip the fiberglass off. The cowl panel can be bent back for sure, depending on how bad it got creased. I got mine pretty close with a ball peen hammer and a block of wood to use as dolly behind it. A very light skim coat of bondo and some sanding, and you couldn't tell it ever happened. The roof is more of a problem though, because you may or may not end up with some creases in it. There's a support bar that runs across from side to side directly above the windshield, so pulling the headliner and popping the dents is basically impossible. You almost need to pop some holes and pull them back, then weld, prime, and paint. Of course, pics would definitely help with giving a definite answer there.
 
what do u mean huh? I thought it was messed up that some idiot stole his damn hood pins. Sorry for caring

It wasn't a sentence. Not sure if it even counted as a sentence fragment, just some words thrown together at the beginning, separated by a comma, then what appeared to be a legible sentence. I do agree that it's pretty s***ty that someone stole the pins though.
 
I wish i could be all i wanted to see is that , that is a real shame what lengths young punks go to theses days to piss on someone elses parade.

i've read your post like 5000 times and i still don't understand what your first fragment means...

but yeah, that sucks bad man. depending on how bad the damage is, you're probably going to have to do what stanggt1995 said. there's a thing called a uni-spotter that i used to use back in auto body school that'll fix that right up. what it does is it lightly welds about a 2.5" copper stud to the dent then you use a slide hammer to pull the dent out. the just cut off the copper stud, grind it down, lay some filler, sand and paint.

here's a link to a uni spotter...kind of expensive but definitely good tool.

http://autobodystore.net/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=2SW
 
I wish i could be all i wanted to see is that , that is a real shame what lengths young punks go to theses days to piss on someone elses parade.

Let me see if I can fix this:

I wish I could be of any help. All I wanted to say is that it's a real shame what lengths some young punks will go to these days to piss on someone else's parade.

Make more sense now? I always recommend proof-reading your posts before you hit the submit button. Everything doesn't have to be 100% perfect, but sentences and decent spelling go a long way on the internet.

That uni-spotter sounds cool, but $379 for the professional model isn't cheap for someone that's only gonna use it once.
 
Let me see if I can fix this:

I wish I could be of any help. All I wanted to say is that it's a real shame what lengths some young punks will go to these days to piss on someone else's parade.

Make more sense now? I always recommend proof-reading your posts before you hit the submit button. Everything doesn't have to be 100% perfect, but sentences and decent spelling go a long way on the internet.

That uni-spotter sounds cool, but $379 for the professional model isn't cheap for someone that's only gonna use it once.

yeah, i was just throwing it out there. if you scroll down, there's one for $189 though. still kind of steep for something used once.
 
So it sounds like my only option for the piece between the windshield and the cowl, is to try to straighten it and then use bondo and paint:shrug:

So what about the hood and the roof? Do you think the hood can be "glued" back together? Is there anyway around fixing the dents on the roof, without painting?

Thanks again for the help
 
fibreglass can be fixed.. just make sure you have good grip for the new glass you put in it!
depending on how bad the cowl is i would consider having a new piece welded in..
roof wise i dont see any way that you can get those dents out without painting.. although i know there is a company here that uses small sucktion cups to pull out dents.. without a new paint job :) (donno if you have that where you live?)
 
I would just bang the cowl out as best I could and fill the rest. Its cosmetic at that point just make it look nice. The roof you are going to have to pull I am not sure if you can pop the dents out. As for the hood, I personally wouldn't trust it anymore. Even if the hinges are glued back in.
Kevin