weird stance?

[stangpower97]

i have eibach springs on my 96 and the rear of the car sits a little too high for my likings it looks like one of them old cars with air shocks on the back kinda and the springs have had plenty of time to settle i was just wondering if there is a easy fix for this or if the eibachs have dead springs on them where you can cut them to adjust the ride height i was just wondering i would like a little rake in the stance put not that much any ideas will be apprecated

 

[kboy262]

My car did the opposite with the sportlines. The rear of my car sat about .5" shorter than the front. What I did was cut a half a coil on the front and it sits pretty much even. If you cut them do not use heat. It will make them weaker.

 

[stangpower97]

good just the person i wanted to talk to so hows it been kboy anyway need to ask you a question

 

[kboy262]

Been good. What's up?

 

[stangpower97]

about your cams i was wondering how much you paid for them and what kind of performance improvment did you gain cause im really interested in getting a set put in i was leaning tword's the 270's because i want it to be known that i have cams but it sound like the 268's will give me that form your vid hope you don't mind telling me just interested thanks dude your one of the coolest on this forum

 

[stangpower97]

sorry i can't type

 

[Defleshed]

sorry i can't type

 

[stangpower97]

what so funny there defleashed i said he one of the coolest i've talked to because he trys to help you insted of being a ******* like you

 

[kboy262]

I love the 268H's. You will be known with these cams. The volume of the exhaust increases and while you sit at a stop light people will look over wandering how a 4.6L is loping. The 274's are just too radical. Their is a lot of duration with these and your car will need a tune. Plus you will lose in the low end area. The nice thing about the 268H's also is the fact the lift is kept below .500". Anyway I purchased them from Summit for $599. You can get them cheaper from ebay and other companies. I just found easier to deal with them thou. The power increase is great. It is a totally different car after 3000rpm. I was actually able to see it hit 6000rpm without it choking too much (before PI intake). This is a most mod in my book. I have a video clip on here with it idleing right after I installed them. The idle is a little fast because it was a cold start. It gives a good idea thou. If you have any more questions just let me know.

 

[stangpower97]

thanks for the info do you have any idea of what maybe the price of install would be for the cams

 

[kboy262]

I installed them myself with the Anderson Cam tool. The install is pretty easy. Actually I found it easier than installing the PI intake. To take a quess at prices I would say anywhere from 400-700. This just a quess. Hope this helps.

 

[stangpower97]

thanks for your help i'll leave you alone now and yes you've been a big help

 

[CottonBurnerz]

i was going to add some comments about the spring.. but never mind now...