• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Weird Whining noise...

  • Thread starter Thread starter Javi
  • Start date Start date Mar 8, 2007

Javi

New Member
Jun 29, 2001
28
0
0
Houston, TX, USA
Mar 8, 2007
#1
  • Mar 8, 2007
  • #1
I have a '01 GT, manual.

When I accelerate to about 2000 rpms, a whining sound starts to occur. If I'm going down a road from a stop position, usually going past 2600rpms or so into shifting into 2nd gears stops the whine. If I am slowing down, then a quick high rev of the engine seems to make the noise stop.

Any idea on what it could be? Did a bit of searching, seems that the problems that other people had were gear related after a switchout. All my stuff is stock, and at about 98K miles.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Mar 8, 2007
#2
  • Mar 8, 2007
  • #2
Javi said:
I have a '01 GT, manual.

When I accelerate to about 2000 rpms, a whining sound starts to occur. If I'm going down a road from a stop position, usually going past 2600rpms or so into shifting into 2nd gears stops the whine. If I am slowing down, then a quick high rev of the engine seems to make the noise stop.

Any idea on what it could be? Did a bit of searching, seems that the problems that other people had were gear related after a switchout. All my stuff is stock, and at about 98K miles.
Click to expand...

does it make this whine noise in all gears? for example if you are on the highway at 2k rpm's or so in 5th gear will it make this noise..

If it is in all the gears I would look at your pinion bearings, it is somewhat common in the 8.8 rear end for the pinion bearings to let go.

Now if you are coasting down and it makes the noise and then you put the clutch in and rev and it goes away then the noise is most likely from your tranny.. if thats the case tell us exactly what gears it does it in and if it get better or worse in some gears and we might be able to isolate what is wrong.
 

four six

Member
Jan 19, 2006
506
2
18
Hobart, IN
Mar 8, 2007
#3
  • Mar 8, 2007
  • #3
No gear? If you do its probally that.
 

StangYellow

Founding Member
Sep 11, 2002
1,052
1
39
Mar 8, 2007
#4
  • Mar 8, 2007
  • #4
if you bought the car used, do you know if the rear end gears were changed? My Ford gears whine just slightly at low rpms.
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Mar 8, 2007
#5
  • Mar 8, 2007
  • #5
svttech76 said:
If it is in all the gears I would look at your pinion bearings, it is somewhat common in the 8.8 rear end for the pinion bearings to let go.
Click to expand...

I would agree with this as well. I'm having the exact same issue, but am waiting to gather up all the monies in order to upgrade the axles and dif. all at the same time.
 

fastfive_ogt

New Member
Jan 31, 2006
23
0
1
Wisconsin
Mar 8, 2007
#6
  • Mar 8, 2007
  • #6
EDIT...
 

Javi

New Member
Jun 29, 2001
28
0
0
Houston, TX, USA
Mar 9, 2007
#7
  • Mar 9, 2007
  • #7
svttech76 said:
does it make this whine noise in all gears? for example if you are on the highway at 2k rpm's or so in 5th gear will it make this noise..

If it is in all the gears I would look at your pinion bearings, it is somewhat common in the 8.8 rear end for the pinion bearings to let go.

Now if you are coasting down and it makes the noise and then you put the clutch in and rev and it goes away then the noise is most likely from your tranny.. if thats the case tell us exactly what gears it does it in and if it get better or worse in some gears and we might be able to isolate what is wrong.
Click to expand...

I'm pretty sure the whine noise happens only in 1st and 2nd gears. I do not hear a whine in 3rd and 4th, and I can't be sure about 5th. Took a nice long drive last weekend, and I guess it's just the normal highway whine in 5th.

But like I said, it seems to be at a certain RPM range, as the whine can continue even if the car is in neutral. Another symptom is that the RPMS fluctuate a bit (while in neutral), sometimes staying at 2k RPMs while almost stalling at 600 RPMs.

Hrm, it's starting to sound like a tranny issue?
 

isjoining

New Member
Mar 28, 2007
143
0
0
Orlando, FL
Nov 12, 2007
#8
  • Nov 12, 2007
  • #8
im having the same problem, i would hear a whining sound coming from the engine from a stop or slow roll up until 10-15mph and it makes the noise only in first and second gear up to 2500rpm.

Edit: also won't make the noise in neutral, only in 1st and 2nd
 

RedDaemon

10 Year Member
Mar 31, 2005
3,470
9
108
Atlanta, GA
Jan 26, 2008
#9
  • Jan 26, 2008
  • #9
i realize this is an older thread but..

my dads 2002 explorer (v6) is doing this very same thing. I am driving it right now in the winter months in upstate new york and i noticed this noise as soon as i brought it up here. like what has been stated, a whine at 2000-2500rpms in 1st or 2nd

its not just a whine, its chringing when youre able to hear it

this time, its on an explorer with an automatic transmission

any helpful advice? to my knowledge the rear end wasnt taken apart for maintainence

i realize its no mustang so this should belong in "other auto" however the same thing thats happening to them is happening to me..at least thats what it seems like
 
You must log in or register to reply here.

Similar threads

A
2001 Mustang GT, scorched metal smell and noise from trans/diff?
  • AndyE2255
  • Dec 1, 2025
  • SN95 4.6L Mustang Tech
Replies
4
Views
570
SN95 4.6L Mustang Tech Dec 28, 2025
gkomo
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
288
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Ford truck engine swap issues
  • keel
  • Jul 7, 2026
  • Other Auto Tech
Replies
17
Views
696
Other Auto Tech Jul 13, 2026
General karthief
L
Drivetrain 2000 GT High Idle - Pulling Out Hair - Help
  • lleonard1185
  • Jan 18, 2025
  • SN95 4.6L Mustang Tech
Replies
9
Views
711
SN95 4.6L Mustang Tech Jun 4, 2025
Leo090
L
J
'96 Cobra: A/C gets weak and engine misfires under load when warm
  • jruhnke
  • Oct 22, 2025
  • SVT Tech Forum
Replies
2
Views
449
SVT Tech Forum Nov 20, 2025
nickyb
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?