• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Went to the track for first time, man do I suck

  • Thread starter Thread starter Jesus
  • Start date Start date Jan 31, 2004
  • 1
  • 2
  • 3
  • 4
  • 5
Next
1 of 5 Next Last

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#1
  • Jan 31, 2004
  • #1
Hi Everyone

Help me out here. I went to the track with my 2003 GT (Mods in Sig) and did not get the results I expected. First of All I had massive traction problems in first (and maybe second) and no, I didnt go through the water box. I was running on the stock Goodyears and roling off the line and then nailing it. No I should mention this was at Tucson International Raceway which is something like 1500-2000 feet above sea level. There was a post by a guy I nkow a few weeks back complaining about his times at this track. I am also a little concerned about the mile per hour I got, it seems kind of low. Any way, any help appreciated. Thanks.

60' 2.333
330 6.752
1/8 9.88
MPH 74.86
1000 12.746
1/4 15.123
MPH 95.33

Barometer:
29.82 in and steady
*
Wind:
SSW 9 mph

Humidity:
36%

I know getting my 60' down to 2 would knock off like 6/10ths on the big end. But what the hell is up with my MPH? What should my 330 look like and 1/8 mile time.
 

32v

My CT sucks Donkey Balls.
Founding Member
Dec 9, 2001
3,487
1
68
North Cuba
Jan 31, 2004
#2
  • Jan 31, 2004
  • #2
How can Jesus suck
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
Jan 31, 2004
#3
  • Jan 31, 2004
  • #3
My bone stock vert went

9.94 @ 72.85 on 1/8 mile track

With your mod in sig.. I agree that you should beable to do better than that.. you also have 4.10 gears.. which 9.88 is way too high for that to happen

You either spun a lot or not shift fast enough with those 4.10 =\

Or maybe there's something wrong with the car?
 

Beau

Founding Member
Jan 29, 2000
3,050
0
0
San Diego
Jan 31, 2004
#4
  • Jan 31, 2004
  • #4
practice practice practice
 

kj99

Founding Member
Sep 2, 1999
346
0
0
Spartanburg SC
Jan 31, 2004
#5
  • Jan 31, 2004
  • #5
Go out an pick up some Nittos DR or get some ET streets. Then practice practice practice.


Also what are you shifting at? 5500
 

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#6
  • Jan 31, 2004
  • #6
Thanks for the help guys. I definately spun bad in first, all the way through first in fact. This really surprised me because that has never happened on the street. As far as how can Jesus suck? Im not going to touch that with a 10 foot divining rod
Oh yeah, I also had my spare in the trunk and was running with 1/4 tank of gas.I am a little worried that there might be something wrong with the car, except it idles fine, doesnt stumble, and doesnt use any oil or coolant. I wonder if the clutch has something wrong with it? I cant seem to bark in second like I used to. I did overheat the car once. I shut it off before the needle got into the red, but the car still puked coolant every where. Somehow the cooling fan had gotten disconected. Most of the people I asked about the overheating thought that the car was probably fine. I even had to of them drive the car and they thought it felt fine.
 

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#7
  • Jan 31, 2004
  • #7
Im shifting at 5800-6000 RPM
 

KISSEL

New Member
Feb 7, 2003
122
0
0
Illinois
Jan 31, 2004
#8
  • Jan 31, 2004
  • #8
Your Mph looks good up top for a 15.1 , I think the problem is in your launch/shifting.
It seems after the 1/8th you are picking up speed. With the 4.10's are you shifting into 4th?

Here is a similar time with similar conditions of which you can compare:

2001 GT 5 speed
Mods: 4.10
everything else stock, even paper filter.

60' 2.215
330' 6.321
1/8th 9.626
MPH 75.37
1000 12.475
1/4 14.870
MPH 94.74


Temp 89
Humidity 99
Barometer 30.75


This was my best time with the car (also my first time with this car)
 

Bone Racing

New Member
Sep 7, 2003
1,075
0
0
Long Island, NY
Jan 31, 2004
#9
  • Jan 31, 2004
  • #9
JESUS, your car should run low 12's...i mean you are JESUS right?...haha

get some d/r's and suspension mods(should be a pre-requisite for new drivers)
and youll see a big diff

good luck
 

Ezekial

Founding Member
Oct 22, 2001
475
0
0
Philadelphia, PA
Jan 31, 2004
#10
  • Jan 31, 2004
  • #10
you did turn off traction control right?
 

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#11
  • Jan 31, 2004
  • #11
Traction control was off.
I really should get some drag radials and control arms. I thought I would be able to just go to the track and drive it (being Jesus and all) but I guess it wasnt in the grand design. Luckily I just sold another car I had (66 Chevy Caprice Coupe) so Ive got a little bit of money to throw at the stang. All though I am now tempted to just save up a little bit longer and get a blower of some kind.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Jan 31, 2004
#12
  • Jan 31, 2004
  • #12
you need a lot of pratice, do that then buy some more mods(tires/susp) even if your altitude is 1500-2000' DA you should be at least low 14's high 13's with your mods. If you go out and buy stuff to cover up your lack of skill, it makes it more difficult to really squeeze all of the potential out of the car how it sits. practice what you lack.
 

JonJon

Founding Member
Aug 16, 2002
4,801
1
68
back in Marylands
Jan 31, 2004
#13
  • Jan 31, 2004
  • #13
If you spun through 1st, that's why your ET/MPH are so low...
Definately tires and practice
 

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#14
  • Jan 31, 2004
  • #14
Cool guys, thanks. I think Im going to order a set of 10.5x17 Bullits for the back, and some 17x9 for the front. I will also get some Nitto 555R's. I might also invest in some kind of drag suspension. Do you guys think I can run a suspension thats more geraed for handling than drag racing and still get the car to have respectable 1/4 et's?
 

neoclasiccl

Founding Member
Jun 1, 2002
3,043
0
57
Help I can't see !!!!!!
Jan 31, 2004
#15
  • Jan 31, 2004
  • #15
Jesus said:
Thanks for the help guys. I definately spun bad in first, all the way through first in fact. This really surprised me because that has never happened on the street. As far as how can Jesus suck? Im not going to touch that with a 10 foot divining rod
Oh yeah, I also had my spare in the trunk and was running with 1/4 tank of gas.I am a little worried that there might be something wrong with the car, except it idles fine, doesnt stumble, and doesnt use any oil or coolant. I wonder if the clutch has something wrong with it? I cant seem to bark in second like I used to. I did overheat the car once. I shut it off before the needle got into the red, but the car still puked coolant every where. Somehow the cooling fan had gotten disconected. Most of the people I asked about the overheating thought that the car was probably fine. I even had to of them drive the car and they thought it felt fine.
Click to expand...

You cant bark second with 4:10's then something is definately wrong with your car. To check the clutch put it in fourth gear going about 30mph and floor it. If the RPM's move and the speedometer doesnt then it's your clutch. If nothing slips then your low on power.
 

Ezekial

Founding Member
Oct 22, 2001
475
0
0
Philadelphia, PA
Jan 31, 2004
#16
  • Jan 31, 2004
  • #16
Jesus said:
Traction control was off.
I really should get some drag radials and control arms. I thought I would be able to just go to the track and drive it (being Jesus and all) but I guess it wasnt in the grand design. Luckily I just sold another car I had (66 Chevy Caprice Coupe) so Ive got a little bit of money to throw at the stang. All though I am now tempted to just save up a little bit longer and get a blower of some kind.
Click to expand...
ok good, just want to cover that as I made that mistake in my friends 02 GT the first time I drove it (which was at the track). I was not aware it had TC til I had problems after shifting into 2nd

You should have better numbers IMHO. In said 02 the car has gone 14.3 with a Fireturd owner behind the wheel and 14.7 with the female owner. Only mods were a OR-H and K&N. These were on stock Goodyears with Bullitt rims in central Oklahoma.
 

Jesus

Banned
May 13, 2003
267
0
0
Woodland Hills, CA
Jan 31, 2004
#17
  • Jan 31, 2004
  • #17
Im going to be bringing the car in to www.bieberfever.com in Phoenix sometime within the next couple weeks to do a leak down test to see if the overheating caused a problem or not. It sounds at the very least like I should have replaced the spark plugs after the incident. So, if after they inspect the plugs, they turn out to be bad I will have that done. They will also drive the car and and let me know if they think its messed up or not. I should have some of this problem (the non driving part) figured out and taken care of in the next couple week.As far as it being the clutch, I went out and punched it from 30 mph in 4th and the car seemed to accelerate fine. Do you guys think it is a good (manditory) idea to get an aftermarket clutch cable and qudrant? I was thinking of having that done while the car is getting looked at. Any opinion on triple hook vs. quick release qudrant?
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Jan 31, 2004
#18
  • Jan 31, 2004
  • #18
im still on the stock clutch. 30k miles and 150+ sub 1.8-1.7 60's and around 200street tire passes. You have that much use on yours? Don't fix it if it's working, the stock clutch is pretty good.
 

Jackie Chan

I didn't read this.
Founding Member
Oct 17, 2002
2,507
4
48
Orlando, FL
Jan 31, 2004
#19
  • Jan 31, 2004
  • #19
If you want to save yourself some money, put a good driver behind the wheel at the track next time. If the car still doesnt perform then there may be something mechanically wrong to warrant the leak down test. I've heard too many guys at the track say that there must be something wrong with the car, yeah there was....them.


btw, change your shift points to 5500rpms
 
R

Ryan L

Founding Member
Apr 15, 2001
783
0
16
St. Augustine, FL
Jan 31, 2004
#20
  • Jan 31, 2004
  • #20
I'm just happy to know that Jesus drives a Mustang.
 
  • 1
  • 2
  • 3
  • 4
  • 5
Next
1 of 5 Next Last
You must log in or register to reply here.

Similar threads

First gear is too tall. Should I make it taller? Nitrous guys, help!
  • FastDriver
  • Dec 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
12
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Dec 31, 2023
AeroCoupe
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
I
correct injector for fox body
  • Idan24
  • Nov 11, 2021
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 18, 2021
Mustang5L5
  • Locked
“Doing stuff the wrong way for the right reasons”: A related stupid story.
  • CarMichael Angelo
  • Apr 26, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2020
a91what
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?