What are the differences between a GT and a Mach 1

Busted07 · Aug 23, 2007

I talked a buddy of mine into getting a stang when he gets back from deployment. He wants a terminator, but i also gave him the option of a Mach 1. He then asked (of course) what the differences were besides the cosmetics, and i had to pause because.. hell, i dont know...

So.. what are the differences? suspension, motor etc...???

04fullitgt · Aug 23, 2007

besides apperance, 4V engine w/305 horses, shaker , different interior that only came in black, different suspension (not positive on this, i was under mine yesterday and noticed that i had tokico struts ), 3.55 gear, and thats all i can think of so far.

Jinx · Aug 23, 2007

Gears and intake are 2.

1990Coupe · Aug 23, 2007

It has a 99-01 cobra block and 03-04 cobra heads on it

04fullitgt · Aug 23, 2007

i thought they were marauder engines?

and add to the list. A much better looking dash cluster IMO

DocG · Aug 23, 2007

noob

Much greater potential being a 4v motor.

Kilgore Trout · Aug 23, 2007

Biggest difference is that GTs suck, every high schooler has one, and they are 2V.

Machs are rare, 32V, and touched by the hand of the Mustang god.

Evenflow · Aug 23, 2007

Kilgore Trout said:
Biggest difference is that GTs suck, every high schooler has one, and they are 2V.

Machs are rare, 32V, and touched by the hand of the Mustang god.

I know plenty of GT's that would poop all over ur slowbra

Crzyhrse · Aug 23, 2007

04fullitgt said:
i thought they were marauder engines?

That's the first time I've ever heard that one. 99.9% of the time I hear "It's an '01 Cobra engine".

The Mach has a twin 57mm Throttle Body.

kevinspann · Aug 23, 2007

Crzyhrse said:
That's the first time I've ever heard that one. 99.9% of the time I hear "It's an '01 Cobra engine".

The Mach has a twin 57mm Throttle Body.

Hmmm i always recall hearing "Its not the previous Cobra engine, even though it is similar"

The Maruader engine theory is plausible
Marauder 302hp/318 lb/ft
Mach 1 305hp / 320 lb/ft

Both were aluminum 4v 4.6s of the same years.

I guess they just both used the same engine, that was slightly different from the cobra 4.6

Aftrbrnr · Aug 23, 2007

I personally see it as a car that slotted itself in a place in between the GT and Cobra. I wonder if we'll see a S197 version of the Mach 1 (giving its retro design, this would be a lot more fitting vehicle to base it on).

GT40XStang9 · Aug 23, 2007

The only problem I see with Machs is the high compression coupled with non-forged pistons. It seems to work in the LSx crowd, so I doubt it's that big of a deal though.

Superhereaux · Aug 23, 2007

Cobra brakes (unpainted) all around

CENTENNIALSTANG · Aug 23, 2007

03 04 cobras, IRS, Iron Block, Forged internals, Eaton supercharger, 4V, T56 transmission. 03 04 mach, 4V, solid axles, aluminum block TR 3650 tranny. 99 01 cobras IRS, a little slower than the mach cause they have a little lower comp. And i think they have the TR 3650 also. Correct me if im wrong.

Crzyhrse · Aug 23, 2007

CENTENNIALSTANG said:
99 01 cobras IRS, a little slower than the mach cause they have a little lower comp. And i think they have the TR 3650 also. Correct me if im wrong.

T-45 on '99 Cobra, midseason of '01 the switch to the TR-3650 was made, so you have to look to see what transmission you got for the '01 Cobra I think.

larrendeuce · Aug 23, 2007

Besides cosmetics, in no particular order. Tokico shocks and struts, unique swaybars, lowering springs, specific higher effort rack and pinion, 40mm piston cobra brakes with ABS(larger then 99-01 cobra), 17" spare to clear the front brakes, solid rear, 28 spline axles, 3.55 gears, Traction control, TR3650 transmission or 4R70W in 03 and 4R75W in 04, bolt on subframe connectors, unique mufflers

DOHC engine: WAP Block not teksid, forged crank on manual, cast on automatic, 03-04 cobra heads and cams, port matches exhaust manifolds, 10 to 1 compression, different timing cover and accesories compared to 03-04 cobra

Its late, hard to think, there is alot more but thats the gist.

Crzyhrse · Aug 23, 2007

larrendeuce said:
Besides cosmetics, in no particular order. Tokico shocks and struts, unique swaybars, lowering springs, specific higher effort rack and pinion, 40mm piston cobra brakes with ABS(larger then 99-01 cobra), 17" spare to clear the front brakes, solid rear, 28 spline axles, 3.55 gears, Traction control, TR3650 transmission or 4R70W in 03 and 4R75W in 04, bolt on subframe connectors, unique mufflers

DOHC engine: WAP Block not teksid, forged crank on manual, cast on automatic, 03-04 cobra heads and cams, port matches exhaust manifolds, 10 to 1 compression, different timing cover and accesories compared to 03-04 cobra

Its late, hard to think, there is alot more but thats the gist.

Good list, I've forgotten most of them. The Auto transmission change is a new one I had'nt heard about. What's the deal with that?

T-Sho · Aug 24, 2007

FBD said:
I talked a buddy of mine into getting a stang when he gets back from deployment. He wants a terminator, but i also gave him the option of a Mach 1. He then asked (of course) what the differences were besides the cosmetics, and i had to pause because.. hell, i dont know...

So.. what are the differences? suspension, motor etc...???

About 45 hp (thats all I needed to know )

Kilgore Trout said:
Biggest difference is that GTs suck, every high schooler has one, and they are 2V.

Yeah but how many High Schoolers have 10 grand to spend on modifications?

Busted07 · Aug 24, 2007

Thank you guys for all of the input. Im trying to convince him to get anything other than a standard GT... not that there is anything wrong with them, they are just everywhere down here.

Thankd again!

Matt's 03 GT · Aug 24, 2007

FBD:

Good thinking. In my area a Mach 1 is about $4,000 more than a gt (give or take)... and a Cobra is about $8,000 - $10,000 more depending on mileage and mods.

I have a GT and looking back I should have bought a Mach. If he can swing it a Cobra is the best platform to start modding... but the Mach is not bad at all.

Anything other than a GT FTW!!!

What are the differences between a GT and a Mach 1

I need my gorilla to be about an inch longer.

I shower with poo

I like cats, cats like me. Cats and I fully agree.

I shower with poo

5th graders > me. They're not bant

Fried or Broiled ?

yellow snow cone lover

Active Member

Member

Whitey cashier gave me the wrong change at the sup

Thanks to Tim, I get off pretty easy.

chicks make me feel inadequate

Member

Active Member

Member

Active Member

New Member

I need my gorilla to be about an inch longer.

Member

Similar threads

Privacy & Transparency

Privacy & Transparency