• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What did I do???? Long post

  • Thread starter Thread starter WhiteFizzo
  • Start date Start date Apr 2, 2007

WhiteFizzo

Founding Member
May 17, 2000
85
0
0
Virginia Beach Va
Apr 2, 2007
#1
  • Apr 2, 2007
  • #1
I am going through the AOD to T5 swap. Two weekends ago I began, but found out that the nuts on the two header studs on the driver side were not going to come out without breaking something. So, I tell the wife that I need new headers in order to continue. A few days later the FRPP headers are here and now I am ready for this weekend to complete the transmission swap. Well, while I was under the car the I accomplished 2 things. I put in new U joints and I put new O2 sensors in the stock H pipe. Now it is 2 weeks later and I have a problem. I was almost to work today when my idle got really low and crazy. It sounds like I have a cam. Then on the way home, about 2 minutes after I cranked the car up, it started again. By the time I got home, the transmission was shifting really wierd, it didnt want to downshift so the engine was bucking pretty good. I pop the hood and there is smoke coming from the passenger side of the engine compartment. I cant tell what is smoking, but it appears to be directly above the first catalityc converter on the passenger side. At first I thought it might be a vacuum leak, but I didnt think they would cause sporatic automatic transmission operation and something to get so hot it smokes. Anyone have this issue before?
 

WhiteFizzo

Founding Member
May 17, 2000
85
0
0
Virginia Beach Va
Apr 2, 2007
#2
  • Apr 2, 2007
  • #2
One more thing. While I was driving home today, when I came to a stoplight the car would idle about 800 rpms and drop to just below 600 rmps over about a 30 seconds. Vacuum problems? This started all of the sudden today.
 

gunmetal5.0

New Member
May 10, 2006
144
0
0
Chico, CA
Apr 2, 2007
#3
  • Apr 2, 2007
  • #3
Now's a good time to do the swap.
 

WhiteFizzo

Founding Member
May 17, 2000
85
0
0
Virginia Beach Va
Apr 2, 2007
#4
  • Apr 2, 2007
  • #4
I agree. The swap is going to happen this weekend. However, I would like to have a driveable car when it is all said and done.

Does anyone know what would happen if one of my new O2 sensor wires melted on the pipe? I'm going to check this tomorrow. I just figured if something like that happened that I would get a CEL.
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
330
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
D
Foxbody Misfire 5.0 Swap
  • DPORTER0729
  • May 2, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
564
Fox 5.0 Mustang Tech Jul 13, 2025
90sickfox
S
New motor help. First start successful. Now will not turn over.
  • SavStang
  • Jun 1, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
119
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2025
SavStang
S
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
287
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
O
Manual to Auto Mach 1 Swap
  • Osnick
  • Mar 16, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
426
1996 - 2004 SN95 Mustang -General/Talk- Mar 27, 2025
Osnick
O
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?