What Do You Guys Think?

[95YellowGTbeasT]

as the topic says, so you think this would be a good cam for my setup???

Vendor Competition Cams
Product Line Competition Cams Xtreme Energy Camshafts
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 2,300-6,500 RPM
Intake Duration 050 inch Lift 240
Exhaust Duration 050 inch Lift 246
Advertised Intake Duration 284
Advertised Exhaust Duration 296
Intake Valve Lift with Factory Rocker Arm Ratio 0.541
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.544
Lobe Separation (degrees) 110
Intake Valve Lash (in) 0.000
Exhaust Valve Lash (in) 0.000
Grind Number FS XE284H-10
CARB EO Number (Not Specified)
Quantity Sold individually.
Notes (Not Specified)


Nick

 

[GTJake]

Probably a little big for P heads. That duration is almost suitable for a stroker.

Jake

 

[194stang]

it also says it is a hyd. FLAT tappet, ie. non roller.....are you sure you dont want a roller?

 

[wytstang]

it also says it is a hyd. FLAT tappet, ie. non roller.....are you sure you dont want a roller?

My thoughts exactly. Our blocks(set ups) are hydraulic rollers.