What do you think of these...

I got the ones made by Roush, but they are ment as replacements for the SN95 units, so a little custom fabricating is necessary. I ran about 1 1/2 bolts up through the back of the seat frame, and cut small holes under the headrest so that they just barely poked through, and put some nuts on top. I put nuts down on the bolt that sit below the leather, so that they can be tightened without pinching the foam. I can get pictures of the next seat I do, I've only done the passenger seat currently.

Actually the strikers are there on my car, the passenger one is a little dirty, but there are no cuts/dents in it, so i feel no need to replace.