I am installing a 86 AOD in a 66 Mustang with a 289. What flexplate do I use and where can I buy one? I have heard Windsor Fox is not good to deal with and Ford Racing has them in their catalog,but they are backordered from Ford. Does anyone have or know of any other sources?
get a flexplate for a 69-up 351w with fmx or aod. same as what other places will sell you for more money. redrilling your current one won't work unless you already have a 164 tooth flexplate. most likely you have the 157 tooth which is a smaller diameter than the 164 so it won't allow the starter to engage
get a flexplate for a 69-up 351w with fmx or aod. same as what other places will sell you for more money. redrilling your current one won't work unless you already have a 164 tooth flexplate. most likely you have the 157 tooth which is a smaller diameter than the 164 so it won't allow the starter to engage
The pan-fill C-4's were all big bell, 164 tooth models. I've run across more of these than the smaller 157's.The newer C-5's were also 164 tooth. I think I may have scrapped a half dozen of those flexplates a year or so ago, they were starting to pile up.