What heads and cam?

[Mustangmekanic2]

What heads and cam should I go with to get to 350-400 hp at the wheels with a CnL intake, 76 mm MAF, Trick Flow intake, equal lengths, x-pipe, and magnaflows?
I'll be throwing a 100hp shot of nitrous in to tromp the local 2001 Saleen.

 

[Killercanary]

How many cubes? NA or with a power adder?

 

[Black95GTS]

Well if you're looking for 350 at the wheels, you can throw on a trick flow engine kit with a 100 shot on a stock bottom end 302, and providing the tune is correct you'll be way over that goal.

Adam

 

[Mustangmekanic2]

Im want about 310 at the wheel with a stock 302 bottom end, and naturally aspirated. On the juice i want over 400. anyone have any ideas?

 

[HankyGT]

Check my 'dynotuned' thread.....mine's right at there on a mustang dyno no less.

 

[Killercanary]

I made 304rwhp/331rwtq with my old edelbrock performer intake/FTI custom cam/AFR165 combo with the supporting goods. There was more in it had I upgraded the valve springs (I was floating them bad enough for the spring to beat through the seat), replaced my TB with a larger one, added long tubes, etc.