I have tried many heat ranges but the way I figure it, is that I should be using a colder plug with the combo I have. I used a colder plug and it sputters on decel. When I had the hotter plugs, It didn't do it hardly at all. The thing is, is that when I pulled the hotter plugs out they, were basically fried. I Just put in the colder plugs recently and I checked them the other day. They seemed to have a lot of carbon buildup on them, but they werent wet or anything. So, what is a good temp. plug or brand to buy, and what is a good gap to set them at? 53 is what I set mine at. motor specs.
|
|
|
\/
|
|
|
\/