what kind of cams/heads should I get?

SiahNyde · Jun 1, 2011

I'm shopping for heads and cams for my mustang but there's just too much stuff out there. I need some help! What kind of setups are you guys running?
I've got a procharger and built bottom end, supporting fuel mods, etc and made 17 pounds of boost at 6500 but the stock heads and custom cams destroyed themselves as some of you may have read in my "engine siezed" post. I'm leaning towards trickflow heads and either trickflow cams or comp cams, but not sure what to look for as far as cam stats etc... let's get this ball rolling! any advice?

Deleted member 38176 · Jun 2, 2011

There is nothing better than TF heads if you can afford them. As far as cams go, Modular Headshop has some nice blower cams.

Dark04GT · Jun 2, 2011

Nightfire said:
There is nothing better than TF heads if you can afford them. As far as cams go, Modular Headshop has some nice blower cams.

+1. Some 44cc TF heads with some of MHS's TF/blower cams would work well for you.

SiahNyde · Jun 3, 2011

thanks for the advice, mhs is a bad @ website, i love finding new sites with good parts! I feel like i found a five dollar bill on the ground!

I've got a couple questions still though... what is a good intake/exhaust duration for a centri blower? and on an unrelated note...would shorty headers be a good or bad option for my setup? the headers I have right now prevent any tranny/head/starter work from being done without pulling the engine and since the tranny is still stock I would assume that will be necessary eventually.

N8Dogg98 · Jun 3, 2011

^ call Nick McKinney or send him an e-mail at MHS. He'll know the exact answer to your cam questions and could probably make good suggestions on what would make the most power.

SiahNyde · Jun 6, 2011

so, i found a full top end kit through trick flow. it has everything i need saving me alot of time that i would waste piecing the kit together. i can get it for 3,099 shipped. hows that deal sound? the only thing that i was concerned about was the cams being some what stock?

Deleted member 38176 · Jun 6, 2011

SiahNyde said:
so, i found a full top end kit through trick flow. it has everything i need saving me alot of time that i would waste piecing the kit together. i can get it for 3,099 shipped. hows that deal sound? the only thing that i was concerned about was the cams being some what stock?

Cams are going to give you the biggest gains so going with mild/stock cams would be a waste IMO.

Dark04GT · Jun 6, 2011

Cams are going to give you the biggest gains so going with mild/stock cams would be a waste IMO.

+1. You can get fully assembled TF heads for $2k. Get more aggressive cams for ~600 and have $400 in your pocket for other odds and ends.

bullitt 736 · Jun 6, 2011

Dark04GT said:
+1. You can get fully assembled TF heads for $2k. Get more aggressive cams for ~600 and have $400 in your pocket for other odds and ends.

Assuming he's reusing his lash adjsuters and followers?

SiahNyde · Jun 6, 2011

I found some nice heads at DSS racing for either 2k or i can get same heads with oversized valves, bronze guides, and hp springs and retainers for 2,299 (D.S.S Racing cylinder heads)
I'm leaning towards those more than the tfs heads at this moment

SiahNyde · Jun 6, 2011

bullitt 736 said:
Assuming he's reusing his lash adjsuters and followers?

half of my lash adjusters are colapsed and 8 of the 16 roller followers have cracks in them...

Dark04GT · Jun 7, 2011

bullitt 736 said:
Assuming he's reusing his lash adjsuters and followers?

The $400 extra in my hypothetical budget more than covers new lash adjusters and followers. They only go for $10-15 a piece.

what kind of cams/heads should I get?

SiahNyde

Member

Deleted member 38176

Dark04GT

SiahNyde

Member

N8Dogg98

SiahNyde

Member

Deleted member 38176

Dark04GT

bullitt 736

Member

SiahNyde

Member

SiahNyde

Member

Dark04GT

Similar threads

what kind of cams/heads should I get?

Member

Deleted member 38176

Member

Member

Deleted member 38176

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency