• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What mods needed to supports Trick Flow Top End Kit??? Help please!

  • Thread starter Thread starter freeloader700
  • Start date Start date Feb 17, 2009
F

freeloader700

New Member
Aug 8, 2007
5
0
0
USA
Feb 17, 2009
#1
  • Feb 17, 2009
  • #1
Hey I want to know everything I NEED to upgrade to support the Trick Flow Top End Kit. I would like to spend the least amount I can. I need a rebulid and want to get this kit. Thank you
 

SPEEDYLIFSAVR

Founding Member
Sep 18, 2000
666
0
16
FL,89 LX 5.0
Feb 17, 2009
#2
  • Feb 17, 2009
  • #2
Consider your shortblock , no sense throwing that kit on a high mile SB , may want to freshen it up . I would recommend:

*fuel pump - atleast 190lph
*adjustable fuel pressure regulator
*24lb injectors
*upgrade mass air meter/calibrate for injectors
*not sure if that kit comes with a throttle body - 70mm
*cold air intake or atleast a K&N
*fuel pressure guage
*new plugs/wires/cap/rotor (if still running OE)
*new exhaust set up would be nice but not mandatory

thats a good list to start!
 

90_Red_LX

Member
Sep 29, 2003
668
5
19
Asheboro, NC
Feb 17, 2009
#3
  • Feb 17, 2009
  • #3
The guy above got it covered pretty good. Strongly consider the shortblock, 3 months after my h/c/i I was going right back through it to do the bottom half. Which was not fun at all man.
 

NIKwoaC

中國製造
15 Year Member
Oct 31, 2006
5,525
943
214
Chengdu Province
Feb 17, 2009
#4
  • Feb 17, 2009
  • #4
Again, everything SPEEDYLIFSAVR said is right on. The most important thing to keep in mind is the fuel system, you see tooooo many people who try to get power out of the stock system and it just won't happen. Bigger injectors, bigger fuel pump, bigger MAF meter, a maybe a good tune and you should be set.
 
F

frcefedlx

New Member
Dec 6, 2004
184
0
0
Feb 17, 2009
#5
  • Feb 17, 2009
  • #5
I would get new lifters then your whole top end is new, the kit does not come with them.
 
S

Sicarius428

Active Member
Jan 6, 2004
2,085
5
49
Feb 17, 2009
#6
  • Feb 17, 2009
  • #6
I would highly suggest new lifters. That is the one thing that the kit didn't come with. You can get by without doing the fuel upgrades but you are running on the very edge. What I did do to get by was get a kirbin fuel pressure regulator and bump up the fuel pressure a couple lbs to hold me over till I could get the MAF, injectors and fuel pump. Everything else that was mentioned above is very relevant so keep that in mind.
Kevin
 
You must log in or register to reply here.

Similar threads

H
Forced Induction On3 Turbo Kit- Parts list NEEDED - 302 Stock Motor
  • Hirothecool1
  • Feb 27, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
1K
Fox 5.0 Mustang Tech Mar 7, 2026
slow84lx
S
H
Drivetrain 6R80 to t56 swap
  • Holymoses
  • Apr 25, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
255
Fox 5.0 Mustang Tech Apr 25, 2026
AeroCoupe
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
256
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
5
Hello Everyone !
  • 5150K
  • Jul 3, 2026
  • The Welcome Wagon
Replies
0
Views
70
The Welcome Wagon Jul 3, 2026
5150K
5
A
Fuel Capable fuel system for +600hp
  • Avia.tuned
  • Feb 24, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
93
SN95 4.6L Mustang Tech Feb 24, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?