What mustang seats work?

[94-302-vert]

I know that 94-04 used the same seat bolt pattern. What is the differences between the 6er and GT seats, and also convertible and coupe seats...

I know I need a convertible rear seat BTW...

Just looking forward to winning a small bet with my wife that will allow me to get these no questions asked... from a JY of course...

 

[trav_19]

the gt seat and the 6er seats are the same really its the foam thats different but they both will bolt in

 

[DarkProphet]

As far as a 'vert vs coupe, the backseats are different. The fronts are the same.

 

[94-302-vert]

So then I really need to find some GT fronts and a Vert rear?

 

[trav_19]

yes gt seats are configured differently

 

[urban96]

all 94-98 swats will bolt right in no mods.

the v6 seats dont have as much side bolster as the GT seats

the 99-04 seats have a slightly different seat bracket, you can either swap brackets or bend the mounting tab (2 hits with a hammer) and theyll bolt right in.
also if you swap to a power seat bracket the plug is different.

again the difference between v6 and gt seats is the side bolster

 

[WhiteCobra95]

What about the '03/'04 Cobra seats? What does it take to install them in a '95?

 

[urban96]

the 99-04 seats have a slightly different seat bracket, you can either swap brackets or bend the mounting tab (2 hits with a hammer) and theyll bolt right in.
also if you swap to a power seat bracket the plug is different.

.

 

[95mustang_gt]

sorry to hijack,but my seat motor went out.I was wondering if i could switch the driver side seat with the passenger side seat.Has anyone tried this?

thanks
Jesse