What next?

[Zeal69]

I took off my upper air intake manifold to replace plenum, valve gasket, spark plugs, and some small hoses connected to the manifold. My question is, is there anything else that I should change since intake is off? Giving a general tune-up and cleaning.

 

[JD1964]

Its easier to get at the PCV valve now. The valve, the grommet and vacuum line. And check all vacuum lines for that matter.

 

[TOOLOW91]

Don’t forget to change the screen under the valve . Many people leave this out . How are your valve cover gaskets ? Have a look while it’s off

 

[96pushrod]

Sounds like a pretty good time to put that nitrous plate on

 

[Rdub6]

When I had mine apart, I took the time to re-tape, and re-loom the injector harness (and any other wire that was easy to reach at that point)