What next?

Z

Zeal69

Member

Oct 31, 2019

24

3

13

Mass

Nov 7, 2019

#1

• Nov 7, 2019

• #1

I took off my upper air intake manifold to replace plenum, valve gasket, spark plugs, and some small hoses connected to the manifold. My question is, is there anything else that I should change since intake is off? Giving a general tune-up and cleaning.

 

JD1964

there is enough sticking out to grab on to

15 Year Member

Jun 28, 2013

3,559

1,600

194

Maryland

Nov 7, 2019

#2

• Nov 7, 2019

• #2

Its easier to get at the PCV valve now. The valve, the grommet and vacuum line. And check all vacuum lines for that matter.

 

Reactions: Zeal69

TOOLOW91

If you're the village idiot what's that make me?

20+ Year Stangneter

Nov 29, 1999

8,501

8,759

234

S.I.NY

Nov 8, 2019

#3

• Nov 8, 2019

• #3

Don’t forget to change the screen under the valve . Many people leave this out . How are your valve cover gaskets ? Have a look while it’s off

 

96pushrod

I think they're a little easier to get off

5 Year Member

May 15, 2018

1,530

872

133

Savannah

Nov 8, 2019

#4

• Nov 8, 2019

• #4

Sounds like a pretty good time to put that nitrous plate on

 

Rdub6

So while I wait to figure out my rear end issues

5 Year Member

Dec 29, 2017

3,962

2,943

153

Long Island, NY

Nov 8, 2019

#5

• Nov 8, 2019

• #5

When I had mine apart, I took the time to re-tape, and re-loom the injector harness (and any other wire that was easy to reach at that point)