What part will make this work?

[SScott]

Thanks in advance!

My Nitrous lines hit my HEI distributer. There is no way for it to clear using the Y adapter below. Is there a 90 that will do this or what size and kind of AN line could I use? Any other ideas are very welcomed!

Thanks again,

Scott

 

[Chrome_Rust]

Could you turn the base plate 90 degrees on way or the other? Not big on nitrous, so I dont know if that will work, but it is an idea....



Charlie

 

[SScott]

Its a good idea but the bolt pattern won't let you turn the plate any way but 180 in either way.

I really appreciate the help Charlie.

 

[90notch_5.0]

Maybe a smaller Y will help

Google Image Result for http://www.eautoworks.com/images/350/NORBlue_Y1.jpg

 

[SScott]

Thanks 90notch!

Someone gave me these links on YB, I think they may work???

Earl s Performance 921103ERL - Earl's Performance Couplers - Overview - SummitRacing.com

Earl s Performance 924103ERL - Earl's Performance Couplers - Overview - SummitRacing.com

 

[dgollem]

Plus one on the 90 degree fittings. Should be able to put them between the y fitting and the base plate. If 90 degree is too tight then run a piece of tubing like the tubing before the y and make a more gradual bend.

 

[faststang90]

u need to check to see if the intake is in the way of the spray bars.i would check that before u spray it. i had a 460 intake that was the same way. i was told to remove the clover leaf.

View attachment 224384

 

[SScott]

Thanks dgollem!

faststang90, I looked and it looks like the holes will spray just over it but I am not positive, its close. I wonder if I could hit the spray and watch it without going blind or choking? Thanks for the heads up!