My Nitrous lines hit my HEI distributer. There is no way for it to clear using the Y adapter below. Is there a 90 that will do this or what size and kind of AN line could I use? Any other ideas are very welcomed!
Plus one on the 90 degree fittings. Should be able to put them between the y fitting and the base plate. If 90 degree is too tight then run a piece of tubing like the tubing before the y and make a more gradual bend.
u need to check to see if the intake is in the way of the spray bars.i would check that before u spray it. i had a 460 intake that was the same way. i was told to remove the clover leaf.
faststang90, I looked and it looks like the holes will spray just over it but I am not positive, its close. I wonder if I could hit the spray and watch it without going blind or choking? Thanks for the heads up!