what SHOULD i be getting out of this guys?

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Sep 1, 2005

#1

• Sep 1, 2005

• #1

fully forged 331 stroker, afr185 heads, Weiand stealth intake,TFS2 cam, holley 750dp, full manual valvebody AOD with a 2800stall, 4.10s, 31spline spool with moser axels on Et streets.....im going to be very dissappointed if it doesnt hit mid 12s!!!

 

SQUEEZE&STROKE

New Member

Jun 24, 2005

0

0

0

SOUTHERN CA

Sep 1, 2005

#2

• Sep 1, 2005

• #2

Modular2v said:

fully forged 331 stroker, afr185 heads, Weiand stealth intake,TFS2 cam, holley 750dp, full manual valvebody AOD with a 2800stall, 4.10s, 31spline spool with moser axels on Et streets.....im going to be very dissappointed if it doesnt hit mid 12s!!!

Click to expand...

My car (1994 gt) with 331, Vic Jr heads, Performer RPM intake, Crane 20 30 (same as e cam) 30 lb injectors, stock t5, all stock suspension and 3.73's on BFG drag radials went 12.70 at 2600 ft above sea level with a 1.8 60 ft. Mid 12's should be no problem...Depending on your driving ability I say 11.90-12.50

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Sep 1, 2005

#3

• Sep 1, 2005

• #3

the car weighs 2900lbs....what would get me running in the 11s consistantly?

 

SQUEEZE&STROKE

New Member

Jun 24, 2005

0

0

0

SOUTHERN CA

Sep 1, 2005

#4

• Sep 1, 2005

• #4

Modular2v said:

the car weighs 2900lbs....what would get me running in the 11s consistantly?

Click to expand...

Nitrous!!!!!!! Or tubular front suspension.

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Sep 1, 2005

#5

• Sep 1, 2005

• #5

hmmmmm tubular front it is lol....they are only like 350$

 

SQUEEZE&STROKE

New Member

Jun 24, 2005

0

0

0

SOUTHERN CA

Sep 1, 2005

#6

• Sep 1, 2005

• #6

But with that tubular k member you are going to need tubular a arms and coilovers. Some companies have decent prices w/ free shipping on the entire kit.

 

wht93gtEd

Active Member

Nov 11, 2004

0

9

29

Jersey Shore, New Jersey

Sep 1, 2005

#7

• Sep 1, 2005

• #7

Modular2v said:

fully forged 331 stroker, afr185 heads, Weiand stealth intake,TFS2 cam, holley 750dp, full manual valvebody AOD with a 2800stall, 4.10s, 31spline spool with moser axels on Et streets.....im going to be very dissappointed if it doesnt hit mid 12s!!!

Click to expand...

wait...you're going to run a spool on the street?

or do you have what's in the sig...

 

2000xp8

SN Certified Technician

Aug 8, 2003

8,029

1,621

194

NJ

Sep 1, 2005

#8

• Sep 1, 2005

• #8

If it's put togther right, that car should be 11.50's, and/or in the 120's in mph (depending on traction.
But i've seen better parts go slower, so who knows.

 

Grn92LX

Fidanza Man!

Founding Member

Jan 14, 2001

6,819

64

129

New York

Sep 1, 2005

#9

• Sep 1, 2005

• #9

The aod isn't gonna show the best dyno #'s I'll say 325-330rwhp. You will have 11's all day. Is that enough stall? (I don't know much about them) You can't splurge for a custom cam instead of guessing? You will need to upgrade your valve springs regardless.

 

I

IntenseBlue

Member

Jul 10, 2005

946

0

16

Sep 1, 2005

#10

• Sep 1, 2005

• #10

An E cam is a little small for that head/intake combo.

 

txstang84

15 Year Member

May 21, 2005

1,639

42

69

Tuscola, tx

Sep 1, 2005

#11

• Sep 1, 2005

• #11

2800 should be enough for the STG 2 cam, it advertises 2500-6000rpm range...maybe a little more would be better, but the torque output of the engine will make the stall speed vary, if it's got good torq, it can make the stall speed higher

 

I

IntenseBlue

Member

Jul 10, 2005

946

0

16

Sep 1, 2005

#12

• Sep 1, 2005

• #12

I'd try something with around .540" lift

 

I

IntenseBlue

Member

Jul 10, 2005

946

0

16

Sep 1, 2005

#13

• Sep 1, 2005

• #13

OOPS, wrong thread.

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Sep 1, 2005

#14

• Sep 1, 2005

• #14

yeah i was second guessing myself on the stall......what would you guys suggest? The car is by NO means my daily driver! it will get driven at the most 30miles a week

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Sep 2, 2005

#15

• Sep 2, 2005

• #15

I had a Crane cam that the TFS2 was based off of in the 357 with TFS Track Heat heads and a Victor Jr. with a BG 750.

It had a 10" 3500 stall with a C4.

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Sep 2, 2005

#16

• Sep 2, 2005

• #16

Is that a transbreak valve body in the AOD?

Cause if it ain't and the AOD doesnt have alot of money into it,you might sell it and buy a C4.

 

P

Project89

New Member

Apr 24, 2005

94

0

0

Panama City, Florida

Sep 2, 2005

#17

• Sep 2, 2005

• #17

Modular2v said:

yeah i was second guessing myself on the stall......what would you guys suggest? The car is by NO means my daily driver! it will get driven at the most 30miles a week

Click to expand...

3000 stall min. but with 30 miles or less a week you should jump up to 3500 stall or better IMO.

 

bluevenom867

I will have images of molesting stuffed animals in

Dec 15, 2003

1,704

1

0

St.Petersburg,FL

Sep 2, 2005

#18

• Sep 2, 2005

• #18

Project89 said:

3000 stall min. but with 30 miles or less a week you should jump up to 3500 stall or better IMO.

Click to expand...

We drive the car around with a 408 and a 8" 5000 stall,its streetable.

A 10" 3500 is very streetable.

 

P

Project89

New Member

Apr 24, 2005

94

0

0

Panama City, Florida

Sep 2, 2005

#19

• Sep 2, 2005

• #19

5000 stall.....mine would blow up!

 

Modular2v

Founding Member

Jun 30, 2002

3,222

23

99

oklahoma

Sep 2, 2005

#20

• Sep 2, 2005

• #20

i think i might be doing the c4 thing.....i have two aods that i ned to get rid of