So in keeping with replacing everything when while putting car back together... I plan to pull the dash to replace the heater core come spring (it wasn't leaking or anything when i got car over 5 years ago, but for the 1 time I drove it, it wasn't putting out heat, plus I have no idea how old or if it's ever been replaced... so I bought a new one from LMR 5 years ago when I started this... so I also plan to replace the A/C evap as well, since all that stuff has been disconnected all this time... the compressor the PO told me he just replaced when I bought the car... so that's is staying but I'm replacing everything else.. I have everything else I believe ( lines, dryer) except the evap and condenser...
so on Rockauto... there are (3) choice for each... (where are all ceaper the on LMR or AM) so which would you guys get?
A/C Condenser - https://www.rockauto.com/en/catalog...85,heat+&+air+conditioning,a/c+condenser,6708
A/C Evaporator core - https://www.rockauto.com/en/catalog...t+&+air+conditioning,a/c+evaporator+core,6768
Also, got all new stuff for rear drum brakes already... so I'm going to replace all the front stuff too... already ran all new SS lines, and have the bradid lines for front caliabers...
So what Calibers would you guys pick - https://www.rockauto.com/en/catalog...cid+v8,1133985,brake+&+wheel+hub,caliper,1704
And wheel bearings - https://www.rockauto.com/en/catalog...,1133985,brake+&+wheel+hub,wheel+bearing,1672
And I was thinking of getting this Rotor and pad kit from AM - https://www.americanmuscle.com/powe...sport-brake-rotor-pad-kit-front-8793-50l.html
Also, I'm going to get the MM SS brake caliber sleeves to upgrade/replace the rubber ones they come with.
And Master cyl - https://www.rockauto.com/en/catalog...133985,brake+&+wheel+hub,master+cylinder,1836
And what belt tensioner would you guys pick from these - https://www.rockauto.com/en/catalog...id+v8,1133985,belt+drive,belt+tensioner,11659
And Distributor - https://www.rockauto.com/en/catalog...l+302cid+v8,1133985,ignition,distributor,7108
I believe I have a Motorcraft module on my current one already, so I don't need one with it... looks like the new ones are cheaper, but I'm guessing there not ford ones... the reman ones I assume are - the first one is the one I'm thinking might be best? - A-1 CARDONE 302892
so many choices, gets confusing...
so on Rockauto... there are (3) choice for each... (where are all ceaper the on LMR or AM) so which would you guys get?
A/C Condenser - https://www.rockauto.com/en/catalog...85,heat+&+air+conditioning,a/c+condenser,6708
A/C Evaporator core - https://www.rockauto.com/en/catalog...t+&+air+conditioning,a/c+evaporator+core,6768
Also, got all new stuff for rear drum brakes already... so I'm going to replace all the front stuff too... already ran all new SS lines, and have the bradid lines for front caliabers...
So what Calibers would you guys pick - https://www.rockauto.com/en/catalog...cid+v8,1133985,brake+&+wheel+hub,caliper,1704
And wheel bearings - https://www.rockauto.com/en/catalog...,1133985,brake+&+wheel+hub,wheel+bearing,1672
And I was thinking of getting this Rotor and pad kit from AM - https://www.americanmuscle.com/powe...sport-brake-rotor-pad-kit-front-8793-50l.html
Also, I'm going to get the MM SS brake caliber sleeves to upgrade/replace the rubber ones they come with.
And Master cyl - https://www.rockauto.com/en/catalog...133985,brake+&+wheel+hub,master+cylinder,1836
And what belt tensioner would you guys pick from these - https://www.rockauto.com/en/catalog...id+v8,1133985,belt+drive,belt+tensioner,11659
And Distributor - https://www.rockauto.com/en/catalog...l+302cid+v8,1133985,ignition,distributor,7108
I believe I have a Motorcraft module on my current one already, so I don't need one with it... looks like the new ones are cheaper, but I'm guessing there not ford ones... the reman ones I assume are - the first one is the one I'm thinking might be best? - A-1 CARDONE 302892
so many choices, gets confusing...
Last edited: