• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

What should I run in my car?

  • Thread starter Thread starter Five04sho
  • Start date Start date Feb 27, 2009

Five04sho

New Member
Apr 3, 2007
11
0
0
Feb 27, 2009
#1
  • Feb 27, 2009
  • #1
I just bought this mustang last week and I want to change the oil in it, but I have a problem. He tells me the motor was redone about a year ago with a little bigger cam and bored 30over. My question is, will this change the amount of oil it needs? What wt should I run? 10-30?
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Feb 27, 2009
#2
  • Feb 27, 2009
  • #2
Nope. The only thing that is going to change the amount of oil is the oil pan. If its a 5 qt. stock style pan or if its a 7 qt. pan. The oil to use is going to depend on the climate where you live.
 

Five04sho

New Member
Apr 3, 2007
11
0
0
Feb 27, 2009
#3
  • Feb 27, 2009
  • #3
Im in OH. would you go 10w-30 or 5w-30?
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Feb 27, 2009
#4
  • Feb 27, 2009
  • #4
10w30 is always safe....if I were you I'd be making sure what he put in it, standard, blend or full synthetic. if he had blend or syn, don't go backwards to standard oil. Probably just a ploy by oil companies, but that's always been the rule
 

parrish5o

New Member
Dec 22, 2008
2
0
0
Dirty South
Feb 27, 2009
#5
  • Feb 27, 2009
  • #5
I run Mobile 1 in all my vehicles, it's good stuff. Just not cheap.
 

HotFox

15 Year Member
Jan 5, 2009
1,051
656
164
SE Michigan
Feb 28, 2009
#6
  • Feb 28, 2009
  • #6
You could look into CENPECO especially since you are in Ohio. It is not sold in stores. The problem I have with all synthetics is they have no or very little detergents. If you ever pulled a pan off a motor that ran synthetic you will see a lot of build up on the bottom of the pan, or when you drain the oil pay attention to the last few drops that come out of the pan. If you’re running a good oil, such as Cenpeco I would not be afraid to drop to 5w30 oil especially in the Midwest. My car I just bought ran Mobil Syn. and I put my 5w30 Cenpeco in it. Cenpeco S3 oil carries 1475ppm of Phosphorus and 1600ppm of zinc. There racing oil carries 2213ppm of Phos., and 2417ppm of Zinc.

I am not a dealer or do I work for Cenpeco, just have done a lot of research on what I pour into my crank cases on all my engines.

Cen-Pe-Co Lubricants Official Corporate Website

Scott
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
3,971
2,943
194
Middle of Maine
Feb 28, 2009
#7
  • Feb 28, 2009
  • #7
As soon as I read "Pariffin based", I quit reading. Pariffin .........AKA.........WAX! I have been into to many Pennzoil* and Q-State* engines to know what wax will do to an engine. I will stick with synthetic oil, thanks.

*if you change your oil EVERY 3K miles, and I mean at 3k, not 1 mile over, then MAYBE you can avoid the Pariffin (wax) build up...........Maybe.
 

HotFox

15 Year Member
Jan 5, 2009
1,051
656
164
SE Michigan
Feb 28, 2009
#8
  • Feb 28, 2009
  • #8
Bullitt347 said:
As soon as I read "Pariffin based", I quit reading. Pariffin .........AKA.........WAX! I have been into to many Pennzoil* and Q-State* engines to know what wax will do to an engine. I will stick with synthetic oil, thanks.

*if you change your oil EVERY 3K miles, and I mean at 3k, not 1 mile over, then MAYBE you can avoid the Pariffin (wax) build up...........Maybe.
Click to expand...


Bullitt have you seen wax build up in engines you tore down?

Never had a problem with build up, and have kept the oil in well over 3K...

most oils **non synthetic oils** are tar based.

Wax based or paraffin can withstand higher temperatures before they start to burn unlike tar based oils.

Scott
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
3,971
2,943
194
Middle of Maine
Feb 28, 2009
#9
  • Feb 28, 2009
  • #9
Yes........that is why I said what I said. I can tear apart an engine and tell if it has had a pariffin oil in it. I ask the customer and I am always right. Mainly most people go well beyond the change interval. My sons friend works at a Jiffy Lube and has verified that most of the cars that come in are not only way over mileage on the change interval, but they also have wax (sludge) build up that can be seen under the oil fill cap. The biggest killer of 5 cylinder Volvo engines is lack of oil changes. They build up with sludge fast! I have seen enough of those engines ruined by the wax/sludge build up. It is a shame to, because they have a killer bottom end.
 

Bullitt347

I have been doing it wrong this whole time
15 Year Member
Mar 23, 2007
3,971
2,943
194
Middle of Maine
Feb 28, 2009
#10
  • Feb 28, 2009
  • #10
parrish5o said:
I run Mobile 1 in all my vehicles, it's good stuff. Just not cheap.
Click to expand...

+1 ...........why do you think that the Corvette, Porsche, Aston Martin and others come from the factory with Mobile 1 and is usually required to maintain warranty? ..........there is a reason!........and it is not marketing!
 

MuDDuQ

Member
Sep 25, 2005
32
1
8
Mar 1, 2009
#11
  • Mar 1, 2009
  • #11
Go see this video about mobil one synthetic if thats the route you decide to go.

Videos
 
8

865.0HO

Member
Jun 26, 2004
65
0
7
Goldendale, WA
Mar 1, 2009
#12
  • Mar 1, 2009
  • #12
Valvoline 10w-30 most of the year. Valvoline 20w-50 in summer.


Pennzoil is crap, the wax buildup from that stuff is crazy. I damn near lost the engine in my Bronco a couple years back do to Pennzoil being used by the previous owner. The wax buildup was so intense that the oil pickup screen was 90% blocked. I tore the engine down and cleaned about 4-5lbs of wax out of the valve cover and oil pan alone.
 

KamiKaziDK

Member
May 16, 2005
555
0
17
Mesa, Az
Mar 2, 2009
#13
  • Mar 2, 2009
  • #13
My dad used penzoil in my 83 f-150 since he bought it brand new, when I replaced the oil pan gasket a couple years ago everything looked clean and as good as my 5.0 that I run synthetic in, Oil changed every 3000 or less miles and never anything added to it. It is a low RPM straight 6 300 though
 

90lxcoupe

20+ Year Stangneter
Oct 7, 2003
3,596
350
134
Mar 2, 2009
#14
  • Mar 2, 2009
  • #14
I always ran Mobil 1 10-30 when i had a 302 with a novi 2000 on it, 10-30 should be fine for what your doing


I run shell 10-30w in my new motor, for me there is no need to run synthetic at the intervals i change my oil, i'd be shocked if i changed it every 750 miles, I dont even run a dipstick, if i want to check the oil, i just change it, but i dont drive the car often, so when i do i really give it a workout
 

mob

the guy who hits on his mom
20+ Year Stangneter
Oct 3, 2003
2,566
136
104
Dallas, TX
Mar 2, 2009
#15
  • Mar 2, 2009
  • #15
I would just stick with 10-30 the whole time. I would also find out what kind of oil he used in it. You can go from synthetic or blend to conventional, its not recommended to go from conventional to synthetic. The first number is basically what thickness the oil is at zero degress, the second number means it wont get thinner than that at waters boiling point, because oil thins out when it gets warmer. You can run a 5-30 in the winter so the oil moves better at start up, but you should be fine with 10-30 anyways, I run straight 50, im in Florida though.
 
You must log in or register to reply here.

Similar threads

T
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
242
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
684
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
878
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
B
2001 v6 New compressor issue
  • badmech
  • Apr 30, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
93
SN95 V6 Mustang Tech Apr 30, 2026
badmech
B
2
Running very very rich
  • 2esoteric
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
338
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?