• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

What spacers to get and where for my sprins? Front is too low! HELP!

  • Thread starter Thread starter Pokageek
  • Start date Start date Jun 4, 2006

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 4, 2006
#1
  • Jun 4, 2006
  • #1
My "c" springs are too low! Where can I get spacers (is that what they are called? to raise up the front a bit? Thx.

Ok, think I found them..These right for c springs?

http://store.summitracing.com/partd...1285&N=4294881596+4294891681+115&autoview=sku

3/8" or go with 1"? Any ideas?
 

BlackVert

15 Year Member
Oct 3, 2003
5,589
9
98
Bethesda, MD
Jun 4, 2006
#2
  • Jun 4, 2006
  • #2
does a 3/8" raise the car 3/8", or does it compress so that it actually doesn't raise it that much?
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jun 4, 2006
#3
  • Jun 4, 2006
  • #3
I know Steeda sells them specifically to fit Mustang springs. Might want to check there.
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
Jun 4, 2006
#4
  • Jun 4, 2006
  • #4
Id assume it rasies it by that much?
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 5, 2006
#5
  • Jun 5, 2006
  • #5
91LX_5L said:
Id assume it rasies it by that much?
Click to expand...

Correct! I just go the answer directly from sunnit. It does raise the car exactly as "spec'd." 3/8 spacer will raise the car 3/8" and not compress.:SNSign:
 
W

wytstang

Mustang Master
Mar 14, 2004
4,988
4
78
Summerville,SC missing South Fl. weather :(
Jun 5, 2006
#6
  • Jun 5, 2006
  • #6
Is your M button broken cause it's summit lol j/k
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 5, 2006
#7
  • Jun 5, 2006
  • #7
LOL. Dam laptop keyboard messes me up. It also has that stupid touch mouse that I brush over with my palm and I end up typing back at the beginning of the sentence after I get halfway through and it looks like gibbrish. ARG, lol!
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 7, 2006
#8
  • Jun 7, 2006
  • #8
Hmm.. they sent me part# MRG-1280. Dunno if that one is right. It's not rubber, its 4 metal pieces instead..
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 27, 2006
#9
  • Jun 27, 2006
  • #9
Ok, so I can't find the spacers for these springs and summit sold me the wrong part. The springs are way too low in the front on my vert. Anyone have any suggested springs to buy? I know there were a few recommendations but I don't remember which ones. Thanks in advance.

I guess I am looking for springs that don't lower the car more than 1-1.5 inches and sit EVENLY and don't ride as harsh.

BTW http://www.steeda.com/ does not sell spacers.
 

FastFord

Founding Member
Sep 5, 2002
380
0
0
Washington
Jun 27, 2006
#10
  • Jun 27, 2006
  • #10
I just went through this myself... My front was 3" lower than stock...(~1.5" springs + 1.5" k-member) WAY too low. I couldn't find any spacers myself. I ended up putting the stock springs on the front... to raise it up 1.5". Eibach pro are supposed to only lower 1.5". Which mine did for the first couple of years, but I think over time they ultimately settled at 1.75". I will eventually swap out for an adjustable coilover system.
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 27, 2006
#11
  • Jun 27, 2006
  • #11
Ok. Thanks man.
 

SeventyMach1

Keep it lubed .... keep it straight .... and keep
Mar 30, 2005
1,940
3
36
North Carolina
Jun 27, 2006
#12
  • Jun 27, 2006
  • #12
When you say "spacers", are you talking about isolators?


Do you have the front isolators in the car right now?
 

Pokageek

Active Member
Jun 10, 2005
2,767
0
46
MA, USA
Jun 27, 2006
#13
  • Jun 27, 2006
  • #13
SeventyMach1 said:
When you say "spacers", are you talking about isolators?

Hmm...well I am not sure. These "spacers" I saw online are supposed to go on the bottom of the front spring perch and lift the car 1-1.5 inches. Maybe they are glorified isolators? Isolators are stock rubber cirles that go on th ebottom and not thick at all?

Do you have the front isolators in the car right now?
Click to expand...
 
You must log in or register to reply here.

Similar threads

What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
143
Other Auto Tech May 31, 2026
LILCBRA
Progress Thread Low Mile 89 GT Restomod - Moving toward paint
  • KRUISR
  • Jan 4, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
63
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 13, 2026
KRUISR
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
526
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
763
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?