What starting point on fuel regulator?

[drakesdad]

I am in the process of finishing my MAF/TB. I have the 24 lb injectors in and waiting on a bid with a BBK AFR, I am wondering what the starting point is with the regulator, any suggestions...Anyone know what the stock one is so I know where to go from there?

 

[95opal]

try starting around 38-39 psi vacum of that should get ya in the ballpark.

 

[drakesdad]

That's what I was looking for, something to get me in the ball park.....Thank you my fellow "OPAL FROST" brother......

 

[95opal]

no problem. I dont know if ya saw this but being an opal frost i thought you might want to check it out. http://www.stangbangers.com/Opal_Frost_Mustang_Registry.htm

 

[drakesdad]

Man that is sweet, I have not seen it before. 5,881 from 95 I am going to Detroit tomorrow to purchase some replica Cobra R's from a fellow stanger' and once I get them on I will click and post....Thanks for that info......

 

[VibrantRedGT]

Lose the auction and get a Kirban. I've had mine for 10 years. I think the stock fuel pressure is 32 or somewhere near that. With your mods it could probably use a few more psi.

 

[drakesdad]

Thanks for the info Joe, I did drop the BBk. I see a lot of the Kirbans and wondered if they were good, seeing that is your choice that will be what I get. I have been told to go ahead and get the guage with it. Where would the proper place to place the guage at. I really don't want it in the interior unless that is the proper place for it.