What's Missing???

[stunner6910]

I have already started upgrading my car and in the past 2 months, I have done Transgo Shift kit, ASP U/D Pulleys, Upgraded Alternator, Starter, and battery with a 190 LPH Walbro Fuel Pump. I'm on a roll and will be getting the following items in the next few months and was wondering if I was missing anything. H/C/I will come later with a 347 stroker, but first I want all the "bolt ons".

1. MAF with 24lb injectors
2. 70mm TB with Spacer
3. FMS L/T Headers, Bassani X-pipe, 2Chamber Flows
4. 4.10 Gears
5. 3000 Stall (what do you think with the stroker coming and all)
6. ZEX Nitrous
7. MSD Distributor, Screamin Demon Coil, Live Wires, Dyna Module
8. CAI with the Tornado (tried and liked it)
9. Timing Chain
10. Fuel Regulator
11. Aluminum Driveshaft
12. Sway Bars and Lowering Springs(steeda)
13. Radiator
14. Custom Chip
15. MSD 6AL Box

This is my wish list and plan on moving on it very quick so if you have any opinions don't hesitate to input them. I'm not sure but I guess I'll be running anywhere between 13.9-14.1 the 1/4 mile w/o the ZEX. What do you guys think?

 

[1105]

Dont worry about the chip. Chances are it wont make that big of a difference. You said the CAI with tornado worked for you? I still find it hard to believe and your the only person that has said it worked

 

[red94fiveo]

I would wait on the injectors, TB, timing chain and chip until you do the H/C/I later. They aren't reall needed on a motor with stock heads and cam and you won't really notice a difference.

BTW - You may want to move up to 30# injectors if you're going to be running a 347 w/ nitrous.

 

[stunner6910]

thanks guys, and will upgrade to 30lb injectors.
about the tornado, it does work, it's just that no one else has tried. at least, no one has said they did.

 

[stunner6910]

redfiveo, email me to [email protected] to talk about some parts for my car. i need the tensioner and the 'splash guard' that goes over the passenger front tire. thanx