Whats the Best Cam to get for a Stock 302?

not to be an ass, but it is hard to beat a stock cam for a stock motor. Just my 2 cents

For the stock motor stick with the stock cam. It is pretty optimized for it and not much if anything can improve on it. If you do go to a TFS or other cam, you will probably loose power through almost all of your rpm band untill you get way high up there. The largest choke point for the stock 5.0 is the intake so I would start there. Next would be the heads and that would a good time to swap out the cam when you get to that point. An edelbrock, gt40/explorer/cobra(basically the same intake) perform great with the stock heads and maintain your low end torque but have great power potential to support aftermarket heads. Other intakes like the TFS, holley and other high flowing ones don't really help till you have some good heads to take advantage of them.
Kevin

Just save your money untill you can get some heads and intake. Puting a big cam in a stock motor isn't going to help you that much. But if your going to do it anyways go with the TFS 1.