I am upgrading my ‘91 Fox to SN95 wheels, brakes, etc. I bought the wheel hubs pictured below from American Muscle. I also bought the AFS Cobra Replica wheels pictured below. In a side note, I realize now that the 18x9 wheel will be too wide for the front of this car. My main issue at this point is that this wheel will not fit on this wheel hub. There is a raised lip inside the wheel, and a slightly raised lip at the base of the wheel hub. Those two lips are making contact and consequently the wheel will not seat on the hub. I’ve sanded down both to remove any irregularities, but I still cannot get the wheel to fully seat. I’m perplexed at what the issue is because the wheel, and the wheel hub are both supposedly for 94-04 Mustangs. Does anyone have any ideas why this may be happening?