• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

wheel shake while braking??

  • Thread starter Thread starter mystang94gt
  • Start date Start date Oct 28, 2004

mystang94gt

New Member
Jun 14, 2004
951
0
0
Bay Area, CA
Oct 28, 2004
#1
  • Oct 28, 2004
  • #1
What are the causes of this? My does it sometimes when braking slightly but when I press the brakes hard it wont do it. My front tires are BAD is that my prob? My rotors were recently replaced because they were warped supposedly (should have done it myself ) but it still does it like it did before the rotors were changed. Any other ideas? i'm planning on replacing all the bushings up front with polyurethane ones eventually cause they are all shot. Could that be my problem? pretty much just guessing at this point. but its pretty embarassing when someones in my car and I hit the brakes and I can barely hold onto the damn steering wheel.
 

donjohn

New Member
Feb 7, 2004
1,757
0
0
Irvine - Southern California
Oct 28, 2004
#2
  • Oct 28, 2004
  • #2
hahaha, that's what it does to me anywhere above 40mph unless i'm braking hard

i too thought it was the rotors, replaced them and nothing different, then i heard u were supposed to replace pads at the same time so i did that the next day and still, no change...

i think ur probably right with the bushings

u figure out what it is, let me know. i'll do the same
 

mystang94gt

New Member
Jun 14, 2004
951
0
0
Bay Area, CA
Oct 28, 2004
#3
  • Oct 28, 2004
  • #3
above 40!! That sounds right to me. But if I hit em hard it just hooks and doesnt shake at ALL. How is your alignment? My is messed up. But I wouldnt think that would have anything to do with it. Hopefully someone will help us out.
 
9

94blackGTvert

Founding Member
Oct 14, 2002
63
0
0
PA
Oct 28, 2004
#4
  • Oct 28, 2004
  • #4
I'd also vote for bushings. I'm almost 100% positive that's why mine does it too. Plus my car tracks everywhere on rough roads and I have some play in the steering wheel. I'm just going to go with these:

A- arms and bushings

new arms, ball joints, and better bushings.
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Oct 28, 2004
#5
  • Oct 28, 2004
  • #5
Mine did that, and would go away when I hit the brakes... new rotors and pads cure it right up. Did you season the rotors? Or have you warped the new ones already?
 

donjohn

New Member
Feb 7, 2004
1,757
0
0
Irvine - Southern California
Oct 28, 2004
#6
  • Oct 28, 2004
  • #6
gcomfx.com said:
Mine did that, and would go away when I hit the brakes... new rotors and pads cure it right up. Did you season the rotors? Or have you warped the new ones already?
Click to expand...

well, i didn't know you were supposed to replace the rotors AND pads at the same time so i may have warped the new ones, and in that case i'll live with it. i did put on the new pads just a day later soo... i dunno
 

gcomfx.com

Founding Member
Oct 22, 2002
3,690
0
56
Republic, MO
Oct 28, 2004
#7
  • Oct 28, 2004
  • #7
Did you season the rotors? I did my last set but I haven't really put THAT many miles on them to see if it helped in long run.

http://www.baer.com/Support/TechTips.aspx?TechTipID=4
 

donjohn

New Member
Feb 7, 2004
1,757
0
0
Irvine - Southern California
Oct 28, 2004
#8
  • Oct 28, 2004
  • #8
no, i didn't even know people did that
 

chefster

New Member
May 24, 2004
426
1
0
michigan
Oct 28, 2004
#9
  • Oct 28, 2004
  • #9
one of most annoying things,i hate when that happens,,,,first off , you will need to get your rotors turned again,but have new tires on...a tire that has been up front too long, will mess up your rotors,depending on the condition of your front end is ,keep rotating evry 4 thou
 

ARed1995GT

New Member
Dec 9, 2003
401
0
0
Boca Raton, FL
Oct 28, 2004
#10
  • Oct 28, 2004
  • #10
yea... for some reason when im being the hardcore streetracer that i am, it does it when i break from 120 mph, anyone know why the wheel shakes :[
 

ARed1995GT

New Member
Dec 9, 2003
401
0
0
Boca Raton, FL
Oct 28, 2004
#11
  • Oct 28, 2004
  • #11
lol im just kidding, it does do it to me from time to time and i get mad
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 28, 2004
#12
  • Oct 28, 2004
  • #12
are you sure it is not the tires themselves? the forces and harmonics from light braking could exacerbate an out of balance condition. have you swapped front and rear wheels, etc?

proper burnishing (new brake hardware) is important for best performance, but few folks really do it; few seem to suffer significant effects.

improper wheel torquing can warp a rotor like that. stay away from the air guns (not you, but guys in a shop that dont care about your car).

a wandering track (which likes to ride and follow ruts) can also come from bad caster settings.

good luck to all.
 

mystang94gt

New Member
Jun 14, 2004
951
0
0
Bay Area, CA
Oct 29, 2004
#13
  • Oct 29, 2004
  • #13
HISSIN50 said:
are you sure it is not the tires themselves? the forces and harmonics from light braking could exacerbate an out of balance condition. have you swapped front and rear wheels, etc?

proper burnishing (new brake hardware) is important for best performance, but few folks really do it; few seem to suffer significant effects.

improper wheel torquing can warp a rotor like that. stay away from the air guns (not you, but guys in a shop that dont care about your car).

a wandering track (which likes to ride and follow ruts) can also come from bad caster settings.

good luck to all.
Click to expand...


I have pretty much all of the problems you listed there. Bad alignment, bad tires, and I know that I didnt do proper burnishing because Im not even sure what that means. I am going to be addressing most of my problems soon. I'll be buying new tires and getting an alignment within the next month or so. Hopefully it will cure the prob. If not I guess its time for some cobra brakes. I will never spend money on stock replacements again.
 

DFG 5OH

Active Member
Aug 28, 2004
1,341
0
36
Louisville, KY
Oct 29, 2004
#14
  • Oct 29, 2004
  • #14
my car did that when i still had my 16" pony wheels on it. The front tires were warped, and dry-rotted, and cause had vibration in the front end when braking. Now i have wheels and tires that are good, and its just a good vibrations now.
 

94TURBO5 O

New Member
Mar 14, 2004
2,509
0
0
VA
Oct 29, 2004
#15
  • Oct 29, 2004
  • #15
Warped rotors will be the cause most of the times and bald fronts will def do that also. If you get cold water on the rotors while their hot like spraying the wheels off during a car wash they will warp like a mofo after a couple times. You should always change the pads when putting on new rotors.
 
You must log in or register to reply here.

Similar threads

H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
97
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
L
05GT brakes on a 98GT?
  • lparsons42
  • Sep 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
175
1996 - 2004 SN95 Mustang -General/Talk- Sep 6, 2025
lparsons42
L
J
2003 convertible front brakes sticking
  • jamesbanasky
  • Jul 9, 2025
  • SN95 V6 Mustang Tech
Replies
2
Views
308
SN95 V6 Mustang Tech Sep 6, 2025
jamesbanasky
J
J
Severe shaking/vibrations in steering wheel
  • jacket999
  • May 20, 2025
  • SN95 V6 Mustang Tech
Replies
8
Views
849
SN95 V6 Mustang Tech Jun 1, 2025
NtheGAME
N
R
What's it Worth? 1997 Cobra, a ton of mods and restoration
  • riored97snake
  • Jun 18, 2026
  • What is it Worth?!?!?
Replies
2
Views
200
What is it Worth?!?!? Jun 21, 2026
riored97snake
R
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?