wheel studs

[Bill88Stang]

does anyone know the part number for the longer wheel studs for stock 4 lug axles? moroso sent me ones for front i dont think there the same are they?

 

[2000xp8]

I know that moser sells them, i had 31 spline moser 5 lug axles and the 3 inch studs were making me crazy, so i just ordered a set of 2 inch moser studs from summit, they make press ins, and screw ins. Mine are also the same threading as the original 4 lug axles.

http://store.summitracing.com/defau...ype=bykeyword&searchtype=both&part=moser+stud

 

[Bill88Stang]

thanks for the link do you happen to know what knurl they are or part number from that page?

 

[88POSLX]

.615 knurl. But, you'll need a 39/64 drill bit to open up the holes a bit to get the stud in.

 

[Bill88Stang]

do they sell any that you dont have to open up the hole?

 

[Bill88Stang]

where can u get a 39/64 drill bit i cant find one anywhere

 

[2000xp8]

where can u get a 39/64 drill bit i cant find one anywhere

I haven't had to do this, but when i need a rare drill bit, i always locate them at the hobby shop, i've even found them the size of a pin.