wheels/spindles/struts/shocks 84-86 svo

There is a wheel thread at svoca.com that you should review, just deals w/ wheel swap options on svo's.

You want a 5.0 spindle so you can go 4 lug? That's a step backwards imo. You may have to change A-arms, but I don't know for sure.

Yeah, new Koni's will break you, I just dropped $511 for all the way around, but if you are buying Cobra wheels ...

Polished SVO wheels look sharp, I get compliments on my wheels all the time.

Are these 17X8 if so what you need to do is do the sn95 swap up front. Use contol arms, spindles , and brakes from a 94-04 Mustang. You will also have to get caster/camber plates to get it to align properly. You will have to use struts for a 87-93 . How much is it sticking out? you might be able to put some C/C plates on and have the caster adjusted so the wheels are at more of an angle which will help it handle better anyways. The rears are probably sticking out quite a bit too right. I had put 99 Cobras on mine and put 01 GT stuff up front and Fox length axles out back. However I am going with 17X9's now and just changed my front control arms to Fox control arms. Now that I think about it you could just put Fox control arms and would have to find the adapter for the balljoint since the Fox is smaller. Might still have to get C/C plates to get it aligned properly.