• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Where Do I Go From Here?

  • Thread starter Thread starter 06cumminsman
  • Start date Start date Feb 8, 2017
  • 1
  • 2
Next
1 of 2 Next Last

06cumminsman

Member
Feb 8, 2017
11
8
13
Alabama
Feb 8, 2017
#1
  • Feb 8, 2017
  • #1
Got a 91 5.0, currently its got gt40 upper and lower, gt40 heads with valves worked, cai system, f cam, 70mm tb, 1.5 roller rocker, 3.73 gears, spec clutch with steeda tri-ax, subframe connectors. I am waiting on my heads to get back from being decked smooth since they had a few small spots that weren't smooth.
I've heard bigger fuel lines, injectors, and throttle body but I'm not sure if I'd get much gains from that
 

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Feb 8, 2017
#2
  • Feb 8, 2017
  • #2
06cumminsman said:
Got a 91 5.0, currently its got gt40 upper and lower, gt40 heads with valves worked, cai system, f cam, 70mm tb, 1.5 roller rocker, 3.73 gears, spec clutch with steeda tri-ax, subframe connectors. I am waiting on my heads to get back from being decked smooth since they had a few small spots that weren't smooth.
I've heard bigger fuel lines, injectors, and throttle body but I'm not sure if I'd get much gains from that
Click to expand...

Fuel lines are fine, leave them alone.

For that combination 19lb injectors are fine, but some could argue going 24lbs. I would say if staying 19lbs, do the SN95 housing MAF upgrade for better throttle response.

70mm throttle body is good for that intake and combo, 75mm maybe, but there's not a lot of material there to port and isn't really necessary with the current mods.

Maybe some good wires, work on the suspension, fuel pump (190 or 255lph), and slicks

Pretty much that combination is maxed out with changing the top end configuration, supercharging it, Nitrous, or jack standing it...turbo jk,

Guess it depends on the goals because right now you're in the 250-285hp range depending on the work done to the heads.
 
Reactions: A5literMan

06cumminsman

Member
Feb 8, 2017
11
8
13
Alabama
Feb 8, 2017
#3
  • Feb 8, 2017
  • #3
Thanks. That's kinda what I'm thinking. Got 9mm Ford racing wires and have thought of the upgraded fuel pump. Wanting to keep it streetable so slicks is out for now unless I throw them on at the track. Wasn't told what all was done to the heads but my machinist said whomever did the work did an excellent job setting the valves flush.
 

Noobz347

Stangnet Facilities Maint Tech... Er... Janitor
Admin Dude
Jan 4, 1985
43,564
21,735
234
Box behind Walmart
Feb 8, 2017
#4
  • Feb 8, 2017
  • #4
Moved to Talk section
 

A5literMan

At least it is lumpy...
5 Year Member
Jul 30, 2011
4,674
2,343
194
Illinois
Feb 8, 2017
#5
  • Feb 8, 2017
  • #5
19's are a little small but can be made to work with a little extra fuel pressure(if needed). I would upgrade the fuel pump. If you never plan on a power adder(i.e. Forced induction) a 155lph pump is my suggestion. The Ford wires are ok but there have been some issues with quality in past few years. Most are fine but others have had issues. I have run them on my car for awhile without issue. I also liked Taylor brand. Keep the rest of the ignition system stock. No need for a "performance coil". Just a FYI.
 

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,766
3,224
203
Taylorsville ky
Feb 8, 2017
#6
  • Feb 8, 2017
  • #6
A5literMan said:
19's are a little small but can be made to work with a little extra fuel pressure(if needed). I would upgrade the fuel pump. If you never plan on a power adder(i.e. Forced induction) a 155lph pump is my suggestion. The Ford wires are ok but there have been some issues with quality in past few years. Most are fine but others have had issues. I have run them on my car for awhile without issue. I also liked Taylor brand. Keep the rest of the ignition system stock. No need for a "performance coil". Just a FYI.
Click to expand...
Sure... now you say that after I ordered 24's and a MSD coil...


Lol just kidding,kinda...
 
Reactions: A5literMan and Davedacarpainter

billison

I like tinted tail
15 Year Member
Feb 27, 2006
2,607
1,094
184
stl
Feb 8, 2017
#7
  • Feb 8, 2017
  • #7
Honestly it sounds like you need to step away from the off the shelf stuff. Maybe look into a custom cam, aftermarket heads and ect. Maybe figure the end goal and then go from there
 
Reactions: Davedacarpainter and Black1987

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Feb 8, 2017
#8
  • Feb 8, 2017
  • #8
RaggedGT said:
Sure... now you say that after I ordered 24's and a MSD coil...


Lol just kidding,kinda...
Click to expand...

Who orders 24s, just go rob them out of 24v Duratech Contours/Tauruses in the junkyard.
 
Reactions: 90sickfox and RaggedGT

General karthief

wonder how much it would cost to ship you a pair
Mod Dude
Aug 25, 2016
28,134
10,752
213
polk county florida
Feb 8, 2017
#9
  • Feb 8, 2017
  • #9
Yea but that guy with the taurus in the wal mart parking lot gonna be mad as heck.
 
Reactions: 95BlueStallion and Black1987

JD1964

there is enough sticking out to grab on to
15 Year Member
Jun 28, 2013
3,637
1,658
194
Maryland
Feb 8, 2017
#10
  • Feb 8, 2017
  • #10
Get a good adjustable fuel pressure regulator like Kirban. Get a wideband A/F monitoring setup like PLX. See where your A/F mixture is at WOT and crank up the pressure if needed. You can get away with 19's but like the others have said, you can squeeze more out of them with some extra pressure. Knowing exactly how much is the key. Thats where the wideband comes in to play.

You said GT40 upper. Is this the GT40 from an Explorer or is it the true tubular GT40 from a Cobra?
 
Reactions: Davedacarpainter

RaggedGT

Been here over a DECADE and still no CT
Mod Dude
Jul 20, 2014
4,766
3,224
203
Taylorsville ky
Feb 8, 2017
#11
  • Feb 8, 2017
  • #11
Black1987 said:
Who orders 24s, just go rob them out of 24v Duratech Contours/Tauruses in the junkyard.
Click to expand...
When's the last time you even saw a contour? Let alone in a junkyard ? lol

(For the record -I did not order injectors,or a coil ) lol
 
Reactions: A5literMan and Black1987

Black1987

my wife Bedazzled my input shaft
15 Year Member
Jan 9, 2011
1,064
595
174
NC
Feb 8, 2017
#12
  • Feb 8, 2017
  • #12
RaggedGT said:
When's the last time you even saw a contour? Let alone in a junkyard ? lol

(For the record -I did not order injectors,or a coil ) lol
Click to expand...
Everyday. Must be a North Carolina thing
 
Reactions: A5literMan, Davedacarpainter and RaggedGT

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Feb 8, 2017
#13
  • Feb 8, 2017
  • #13
RaggedGT said:
When's the last time you even saw a contour? Let alone in a junkyard ? lol

(For the record -I did not order injectors,or a coil ) lol
Click to expand...
And thank God for that....
 
Reactions: RaggedGT

06cumminsman

Member
Feb 8, 2017
11
8
13
Alabama
Feb 8, 2017
#14
  • Feb 8, 2017
  • #14
Gt40 from the cobra. I wasn't sure about the widebaband gauge but needed another one for the triple pillar I'm adding. The end goal is to be streetable but stand up or outrun my truck. It's around 600hp and 1200 ft pounds of torque with custom tune.
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Feb 8, 2017
#15
  • Feb 8, 2017
  • #15
Out run your 1200ftpd truck.........You might consider a little more than what you have.

Get a 351, bore and stroke it to a 427, choose your poison for forced induction and forget ever taking it on the road when there is any moisture, including a neighborhood kid spitting on the pavement.

If this weren't a mustang forum, i'd love to hear about your truck! To hell with it, tell me about your truck!
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Feb 8, 2017
#16
  • Feb 8, 2017
  • #16
24lb injectors and MAF would give you a little more room to grow. Seems most are suggesting bumping up fuel pressure.

Just think....two v6 cars were listed here...with 24lb injectors.

The car will run with 19lb and a little pressure but not at optimum limits of the injectors.

A wideband is very important on any performance car.

The fuel pump upgrade is definitely worth it. The rails are good till around 500hp ( supposedly ). Mind you 500hp is pushing the limits of the block and chassis on a fo

If the brakes haven't been upgraded, they would be an awesome upgrade. Factory fox brakes suck. Now would be the time to stick a 93 cobra booster in there and upgrade to disc brakes on all four corners. That would mean going 5 lug.

Do you have any suspension upgrades ?
 

90sickfox

Wasn't a pretty sight...and I've got big hands
SN Certified Technician
Mar 2, 2015
6,953
5,831
213
Feb 8, 2017
#17
  • Feb 8, 2017
  • #17
I've been at the track and seen built to the hilt Dodge deisels run 12s in the quarter. Because of the weight difference it isn't hard to beat a 600hp truck with a... 300hp fox. Its the power to weight ratio ya know.

10000lb truck needs 5 times more power to move as fast as a 2000lb car. If 2000 pound car has 300hp the 10000lb truck needs 1500hp. Fox mustangs are usually between 2700 and 3200lbs ?

I'm no engineer...but torque comes into play in the equation somewhere....but its all relative to the mass it has to move.
 
Reactions: A5literMan and Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,634
203
Discordia
Feb 8, 2017
#18
  • Feb 8, 2017
  • #18
90sickfox said:
I've been at the track and seen built to the hilt Dodge deisels run 12s in the quarter. Because of the weight difference it isn't hard to beat a 600hp truck with a... 300hp fox. Its the power to weight ratio ya know.

10000lb truck needs 5 times more power to move as fast as a 2000lb car. If 2000 pound car has 300hp the 10000lb truck needs 1500hp. Fox mustangs are usually between 2700 and 3200lbs ?

I'm no engineer...but torque comes into play in the equation somewhere....but its all relative to the mass it has to move.
Click to expand...
You're so smart, i feel like an r-tard.:zombie:
 
Reactions: Kman92

06cumminsman

Member
Feb 8, 2017
11
8
13
Alabama
Feb 8, 2017
#19
  • Feb 8, 2017
  • #19
Davedacarpainter said:
Out run your 1200ftpd truck.........You might consider a little more than what you have.

Get a 351, bore and stroke it to a 427, choose your poison for forced induction and forget ever taking it on the road when there is any moisture, including a neighborhood kid spitting on the pavement.

If this weren't a mustang forum, i'd love to hear about your truck! To hell with it, tell me about your truck!
Click to expand...
Haha well when you consider the truck is right at 9k and sitting on 35's it takes a lot to get it moving. I'm just short of stock z06 since I haven't but the billet trans in. Don't want to build it anymore and cause issues with it's intended use of hauling a big load
 
Reactions: Davedacarpainter

06cumminsman

Member
Feb 8, 2017
11
8
13
Alabama
Feb 8, 2017
#20
  • Feb 8, 2017
  • #20
Brakes seem to suck which the skinny front wheel doesn't help, it's had shocks and struts upgraded but I think I can do better on that part too. I've seen a few post about converting to 5 lug, but would love to keep the 4 and just upgrade what's there.
The torque comes into play on start off the line, more so to get a heavier vehicle to launch hard. Currently with semi sticky tires I can launch my truck in 4 high and rip up asphalt at the track. I can't help it, when I need to move I want the power there. The car feels faster to me but I haven't yet done the true test. Plus as much as I love that throaty roar from my truck I can't find anything better than a good exhaust in a 5.0 as you snatch gears.
 
Reactions: Davedacarpainter, 90sickfox and Black1987
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
470
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
917
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
SOLD For Sale '92 LX Street/Drag car - WV
  • MikeyMustang
  • Apr 12, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Dec 31, 2025
MikeyMustang
For Sale 3-owner 1987 Mustang GT, $18K obro, Lancaster CA
  • Bill Cool
  • Oct 6, 2024
  • Fox Body Mustangs For Sale (1979-93)
Replies
4
Views
2K
Fox Body Mustangs For Sale (1979-93) Oct 13, 2024
nickyb
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?