where do those RED/GREEN/WHITE wires connect too?

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 19, 2004

#1

• Feb 19, 2004

• #1

well im almost done putting everything back together and that little harness of four wires that comes out of the passenger side fender, Just wondering where does that? Where do each of those wires connect too? I removed my EGR So im just wondering if i need those or not i think maybe there Vaccume Lines or something if someone can take a pic or something id appreicate it.

 

M

madams74

Founding Member

Jan 26, 2002

664

1

17

Maryville, TN

Feb 19, 2004

#2

• Feb 19, 2004

• #2

FordStang said:

well im almost done putting everything back together and that little harness of four wires that comes out of the passenger side fender, Just wondering where does that? Where do each of those wires connect too? I removed my EGR So im just wondering if i need those or not i think maybe there Vaccume Lines or something if someone can take a pic or something id appreicate it.

Click to expand...

They are vacuum hoses. They go to the EGR, and the vacuum tee. Check out Stang net FAQ and you can see the routing pictures.

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 19, 2004

#3

• Feb 19, 2004

• #3

Green goes to the EGR, red goes to the intake, white(tan?) goes to the smog pump.

If you have your smog pump and EGR removed, you do not need to have thoes lines hooked up. Just plug them and stick them in your fenderwell.

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 19, 2004

#4

• Feb 19, 2004

• #4

i see the red,green and tan, but there is a white one too. It comes out of the harness alittle before the other three do at the end. Anyone know anything?

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 19, 2004

#5

• Feb 19, 2004

• #5

I think the white and tan are both for the smog equipment... Its been awhile since I've had my smog pump on so I cant remember. I'm just running the red and green lines for my EGR.

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 19, 2004

#6

• Feb 19, 2004

• #6

ok well i dont have EGR so do i need to run the red and green, or just red to intake??

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 19, 2004

#7

• Feb 19, 2004

• #7

anyone?

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 19, 2004

#8

• Feb 19, 2004

• #8

Sorry for the late response... I had to go to work.

Do you still have your smog pump on your car? If you do I THINK you might need to have the red line hooked up. The red line connects to a sylonid(sp?) in the inner fender which contorls the vaccume to the EGR valve (green line) and quite possibly would control the vaccume to the other 2 lines. I'm not 100% sure on this, but it makes since I guess

If you can get to the fitting under for the red vac line easily, then plug it and drive the car around and see if anything happens. But if you have your smog and egr both gone, you dont need any of thoes vaccume lines.

 

R

rockin_rick

Member

Oct 9, 2003

968

1

17

Feb 21, 2004

#9

• Feb 21, 2004

• #9

See this post:

http://forums.stangnet.com/showthread.php?t=403077

or

http://members.pro3i.com/forums/showthread.php?t=403077

Rick

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 21, 2004

#10

• Feb 21, 2004

• #10

Can someone tell me where that "plunger" is that RIO said you have to set so you won't get a CE light? I've heard about it, but not sure where it would be located.

 

S

StormTrooper

New Member

Jan 10, 2004

34

0

0

Mississippi

Feb 22, 2004

#11

• Feb 22, 2004

• #11

the plunger is inside the egr positiononing valve bolted to the egr valve, red goes to it, green goes to the egr valve, white goes to the smog pump, tan goes to the purge valve (small tube with large vacuum one going to canister the other going to the underside of the upper intake)

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 22, 2004

#12

• Feb 22, 2004

• #12

Anyone remove that Canister(black box in the passenger fender)?? Gas tank fuems go to it?

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 22, 2004

#13

• Feb 22, 2004

• #13

Yes, you can just have the tank vent out into the air.

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 22, 2004

#14

• Feb 22, 2004

• #14

So just let that Vent for the tank hang in the inner fender or Extend it so it is level with the Control arm or so it just so it reaches the outside Pointing down....Sorta like how a dirtbike ot ATV has that rubber hose hanging pointing down

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 22, 2004

#15

• Feb 22, 2004

• #15

You can put it anywhere you feel like. I'd try to find a place where the fumes are less noticable inside the car.

 

FordStang

Founding Member

Sep 19, 2002

862

1

0

Orange Park, FL

Feb 22, 2004

#16

• Feb 22, 2004

• #16

so just make sure it has a clear path to the ground under the car? prob just right around under the passenger side fender since that where its comes out

 

1105

I AM the random post master...bow down

May 3, 2003

3,841

0

0

Daytona Bch, FL

Feb 22, 2004

#17

• Feb 22, 2004

• #17

Yes, thats where I'm going to be venting mine to in a few days. Just got rid of my EGR today, tomorrow I'll probably take all the stuff off that I dont need.