where is the chip located in my 94 Cobra computer?

[393strokervert]

Ok, I'll try to make this short. my mods are in my sig & the car has a 94 Cobra computer in it. The car was dyno tuned/chipped with a C&L meter in it.
I just got my 80mm Pro-M meter back from getting it calibrated, & the guy at Pro-M told me that I might have to get it re-chipped because my chip was made to work with the C&L & that with the Pro-M the fuel tables,A/F ect.. would probably be off. He told me to try removing the old chip & run it on the stock computer. He said I would probably be surprised at how good it would run without a chip.I think it's worth a try. I know this is a stupid question but ,
Can someone tell me where to find the chip in my computer so I can know exactly what I am looking for before I tear into it? I have never messed with chips so I don't really know what to look for.
any help would be appreciated. Thanks, Joe

 

[94cobra#519]

passenger kick panel closest to the door

 

[393strokervert]

OK, Thanks.. I know where the computer is as that is how I knew that it was a 94 Cobra.sorry, I should have put that in my post. is the chip actually in the computer or maybe between the the plug/computer or something like that? Thanks

 

[toppdogg_1]

The chip should be plugged into the side of the factory ECM. On the opposite side of the harness plug in. If there's no chip there should be a black rubber cover over it

something like that

 

[393strokervert]

Thanks (toppdogg_1) for the precise info & the pic,exactly what I needed. I will look at it tonight. Thanks again.