• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Where the f*** is the turn signal flasher

  • Thread starter Thread starter jeffbigwood27
  • Start date Start date Apr 17, 2005
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 17, 2005
#1
  • Apr 17, 2005
  • #1
I have looked everywhere and i cant find it. I have an 88gt and the turn signals dont work they just stay on so I was going to change the flasher. I thought I had found it on the back of the fuse panel but that turns out to be the emergency flasher. I was told the turn signal was behind the radio but I cant find the dam thing and it is driving me nuts. Thanks for the help..
 

PeteyAce

Member
Jul 2, 2004
346
0
17
Apr 17, 2005
#2
  • Apr 17, 2005
  • #2
when you turn your signall on do both your dash flashers turn on and not blink? and your outside ones do nothing?
 

BlackFox5.0

Founding Member
Aug 7, 2000
3,514
1
0
Massachusetts
Apr 17, 2005
#3
  • Apr 17, 2005
  • #3
Empty your glove box, and push in the corners while it's open, which it should then drop down. The look into the dash to the left, if it's not there, then it might be under the steering column. I've seen them in both spots.....
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 17, 2005
#4
  • Apr 17, 2005
  • #4
PeteyAce said:
when you turn your signall on do both your dash flashers turn on and not blink? and your outside ones do nothing?
Click to expand...


They were doing that but I replaced the gauge cluster to 140mph and now when i turn on the left or right blinker the light will come on and it just stays on. I will check both places he mentioned. I looked behind the glove box and i didnt see anything but it is getting dark so i probably missed it. And I am almost positive it looks just like the emergency flasher. Thanks.
 

Jquintel

Member
Jun 8, 2003
194
0
16
Fort Wayne, IN
Apr 17, 2005
#5
  • Apr 17, 2005
  • #5
open your eyes and use a light lol just messing, easy to miss if you dont know what your looking for
Open up your glove box, all the way. Push the tabs together on the side and you should see a blusish round fuse

thats what your looking for
 

sheff2720

New Member
Nov 30, 2003
182
0
0
Horsham, PA
Apr 17, 2005
#6
  • Apr 17, 2005
  • #6
edit: everyone beat me to it
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 17, 2005
#7
  • Apr 17, 2005
  • #7
Jquintel said:
open your eyes and use a light lol just messing, easy to miss if you dont know what your looking for
Open up your glove box, all the way. Push the tabs together on the side and you should see a blusish round fuse

thats what your looking for
Click to expand...

You are the man. I will find it tomorrow. Thanks it was driving me crazy.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 17, 2005
#8
  • Apr 17, 2005
  • #8
they can be found: behind the glovebox, behind the radio, between the radio and steering column. there is no one spot for it.

also, does your hazzard switch work (like was asked before)?

good luck.
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 17, 2005
#9
  • Apr 17, 2005
  • #9
HISSIN50 said:
they can be found: behind the glovebox, behind the radio, between the radio and steering column. there is no one spot for it.

also, does your hazzard switch work (like was asked before)?

good luck.
Click to expand...


Yup the hazzards work.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 17, 2005
#10
  • Apr 17, 2005
  • #10
gotcha. i thought you might have had some freak deal where you did not have enough wattage draw in the TS circuit on each side to heat the bi-metallic spring enough to move.

carry on.
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 17, 2005
#11
  • Apr 17, 2005
  • #11
HISSIN50 said:
gotcha. i thought you might have had some freak deal where you did not have enough wattage draw in the TS circuit on each side to heat the bi-metallic spring enough to move.

carry on.
Click to expand...

Yeah i get what you are saying. When the turn sigs did work they got slower and slower so i replaced what i thought was the flasher but it was for the hazzards. Well my goal for tomorrow is to find the stupid thing. Thanks for the help.
 

PeteyAce

Member
Jul 2, 2004
346
0
17
Apr 17, 2005
#12
  • Apr 17, 2005
  • #12
as stupid as it sounds, i had the same problem and it was just a bad bulb, check your bulbs, it could be them
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 18, 2005
#13
  • Apr 18, 2005
  • #13
PeteyAce said:
as stupid as it sounds, i had the same problem and it was just a bad bulb, check your bulbs, it could be them
Click to expand...
Petey, that is exactly what Jeff and i were talking about in the posts above here. since the hazzards work fine, that suggests the bulbs are fine (insufficient wattage from bulbs being burned out can cause the bi-metallic spring in the flasher to not heat up enough to bend away from the contacts; the result is often a solid light, rather than a flashing turn signal).

good thought though.
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 18, 2005
#14
  • Apr 18, 2005
  • #14
Well I found the stupid thing. It was above the fusepanel on the back above the emergency flasher. I guess on 87 and 88 gt they put them there and on the newer ones they put them by the glovebox. Thanks for all the help I replaced it and now they work like they did in 88. Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 18, 2005
#15
  • Apr 18, 2005
  • #15
jeffbigwood27 said:
Well I found the stupid thing. It was above the fusepanel on the back above the emergency flasher. I guess on 87 and 88 gt they put them there and on the newer ones they put them by the glovebox. Thanks for all the help I replaced it and now they work like they did in 88. Thanks
Click to expand...
glad to hear you got it. now we know how shops used to charge 400 dollars ($395 for labor) to change a TS flasher.
 
J

jeffbigwood27

New Member
Nov 10, 2003
86
0
0
oklahoma city
Apr 18, 2005
#16
  • Apr 18, 2005
  • #16
HISSIN50 said:
glad to hear you got it. now we know how shops used to charge 400 dollars ($395 for labor) to change a TS flasher.
Click to expand...

Now to change the blinker fluid they said it is somewhere in the steering colum.
















































J/k blinker fluid yeah right.
 
You must log in or register to reply here.

Similar threads

T
Need help 67 hazard flashers not working
  • THS70
  • Jan 21, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
15
Views
760
1965 - 1973 Classic Mustangs -General/Talk- Jan 29, 2026
Noobz347
D
Turn signals work only with ignition on & Engine off.
  • DienstXIV
  • Jul 2, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
603
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 7, 2025
DienstXIV
D
7
70 Mach 1 Turn Signal Indicator light issue,
  • 70 Mach
  • Oct 19, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
222
1965 - 1973 Classic Mustangs -General/Talk- Nov 25, 2025
Mach1 Driver
M
Z
Turn signals not working at all, but hazards do. 91 fox LX 5.0
  • Zeke1995
  • Jun 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
776
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2025
Jarhead67
J
9
Electrical Hazards dont work - but turn signals do
  • 91EmeraldGT
  • Nov 17, 2024
  • Fox 5.0 Mustang Tech
Replies
5
Views
536
Fox 5.0 Mustang Tech Nov 18, 2024
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?