• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Where to buy valvetrain hardware?

  • Thread starter Thread starter djharr
  • Start date Start date Jun 3, 2009
D

djharr

New Member
May 27, 2006
10
0
0
Jun 3, 2009
#1
  • Jun 3, 2009
  • #1
I realize that we are not supposed to advertise anything for sale here, that is cool. However, I am in need of some parts, so is it appropriate to ask where to get them here?

I have a set of twisted wedge aluminum heads I bought several years ago. At the time, I got them ported and polished. This of course required that the heads be disassembled. Now, some years later, I am finally putting the heads back together in preparation for installing them on an engine. However, I have misplaced a bunch of the components. I am missing several seals, a bunch of valve retainers, the valve seats, and a couple of the retainer sleeves. I have all the springs and all the valves, that is no problem, I just need to replace the associated hardware. It seems as though not many people sell things at that level of detail, preferring instead to sell entire valve assemblies. My springs and valves are perfectly good, in fact, they have been treated with some tech-line coating to improve performance, so I have no desire to replace them.

Can anyone point me to a site where I might be able to pick this stuff up?

Thanks.

David
 

strtrcr50

New Member
Jun 21, 2006
0
4
0
Previously from Dirty Jerzey exit 7a
Jun 3, 2009
#2
  • Jun 3, 2009
  • #2
How about from Summit? You can get the part numbers from trick flow's website. Not sure if this is the model head you have, but they should have it if you pick your part number.
http://www.trickflow.com/partdetail.asp?part=TFS-51400004&view=4096&N=400098+150&orig=1
 
D

djharr

New Member
May 27, 2006
10
0
0
Jun 3, 2009
#3
  • Jun 3, 2009
  • #3
Thanks for the link. That is exactly the hardware I am looking for. I will contact Trick Flow tomorrow and find out how to the get the parts.

Again, thanks for the answer.

David
 
You must log in or register to reply here.

Similar threads

Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Resolved Fixing a GT40P Valvetrain nightmare
  • foxbodyclark
  • May 21, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
1K
Fox 5.0 Mustang Tech May 24, 2025
limp
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
461
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
611
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Forced Induction Bypass valve backwards?
  • Dontknowchit
  • Jun 25, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
486
Fox 5.0 Mustang Tech Jun 29, 2025
JD1964
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?