Where to get a new balancer?

xYoung347x · Jul 5, 2004

I need to get a new 28 oz balancer but I dont want to spend like 300 dollars so any suggestion? anyone knows the website to Professional Products?

wytstang · Jul 5, 2004

www.Professional-Products.com 50resto sells them pretty cheap. i purchased mine from www.c-f-m.com because 50resto did not have mine in stock(50oz).

xYoung347x · Jul 5, 2004

rolleyes to you too, and thanks.

wytstang · Jul 5, 2004

your welcome

xYoung347x · Jul 6, 2004

can someone check this out to see if this will work on my 347 Stroker? Thanks.
http://mustang.c-f-m.com/index.asp?PageAction=VIEWPROD&ProdID=353

HoofnIt · Jul 6, 2004

The PP piece will work with both internal and external balanced engines. If you need 28 oz. just take the weight out by loosening a few screws.

xYoung347x · Jul 6, 2004

HoofnIt said:
The PP piece will work with both internal and external balanced engines. If you need 28 oz. just take the weight out by loosening a few screws.

Im a dumb@ss, Im not gettin what you're saying.

wytstang · Jul 6, 2004

These balancer have removeable weights on them. Lets say you switched setup and used a 50oz balance system. All you would have to do is order the 50oz weight it self and not a whole new balancer.

xYoung347x · Jul 6, 2004

so this balancer will work?

wytstang · Jul 6, 2004

No if it is a stock balancer you can not remove the weight from it and tranfer it to another. However if you have an aftermarket balancer it may have this feature and the only way to find out is by removing the balancer. So if you have a stock balancer the answer is no the weight can't be removed.

wytstang · Jul 6, 2004

You changed ?? on me.

wytstang · Jul 6, 2004

The balancer you posted has the right weight on it but my concern is that it only has 3 bolt holes(the one pictured). Does your have 3 or 4? The one I bought(81&later 50oz) had 4 because thats what mine required. I think the 80&earlier only has 3.

xYoung347x · Jul 6, 2004

sorry, my motorsport balancer is going out on me so I need a new one. will that one work tho?

xYoung347x · Jul 6, 2004

I have a four bolt pattern but I couldn't find any on that site.

wytstang · Jul 6, 2004

You will have to call them and ask. I don't know if the 80&earlier with the 28oz are just in 3 bolt or are available in the 4 bolt pattern .

wytstang · Jul 6, 2004

If they do don't forget to get that spacer you have to use it.

wytstang · Jul 6, 2004

This is what mine lookes like notice the required spacer on it.

xYoung347x · Jul 6, 2004

Man PP has some bad@ss price. 79.00 for it!!! but its a 3 bolt pattern!!! I gotta keep searching so any help would be nice.

JJ95GTID · Jul 6, 2004

I have a SFI approved version of the Proffessional Products balancer. It is nice because it can be used for 0, 28, and 50 oz imbalance setups.

You said you needed a 28oz imbalance balancer for your 347ci stroker motor. So, when you order your balancer tell them you need the 28oz version of the balancer for a 1994/1995 Mustang GT. You will also need to get the spacer that will adapt your crank pulley to the balancer. Be sure to ask if it comes with the spacer! I got mine from www.TheMustandDepot.com. They had very good customer service.

BTW, this weekend on Horsepower TV they featured the same balancer I have on Hot Parts

xYoung347x · Jul 6, 2004

jj95GT, check your pm.

Where to get a new balancer?

New Member

Mustang Master

New Member

Mustang Master

New Member

New Member

Mustang Master

New Member

Mustang Master

Mustang Master

Mustang Master

New Member

New Member

Mustang Master

Mustang Master

Mustang Master

New Member

Active Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency