I just switched a 95 GT over from auto to stick and I need a 5 speed computer and I called a few parts stores and they listed two different ones and couldn't tell me which one I needed, They said I would have to call ford and see which one I needed. Whats the difference between the two. Will either of them work.Thanks
Which 5 speed computer do I need?
- Thread starter BAD88GT
- Start date
. And since its an auto computer it wont have the annoying shift retard inbetween shifts. Again, just what I've heard.
95strokerPSU
Member
Guy that I know was using an auto computer for a week after he swapped to a 5 speed trans and he said he couldn't go past 4K RPM's. Just what I heard. But I had a TM40 in my car before I installed an 93' A9L. Which brings up the point of whether you plan on installing heads or a cam in your car. If you are, you might want to do the A9L conversion now. Just a thought.
T4M0 is for the 94-95GT T-5 trans Stangs.
The pcm you now have could be used with your t-5 but you need an interface like Tweecer, etc to make it happen.
Why don't you offer 95strokerPSU a few bucks for the pcm he is not using but you need?
Later
Grady
The pcm you now have could be used with your t-5 but you need an interface like Tweecer, etc to make it happen.
Why don't you offer 95strokerPSU a few bucks for the pcm he is not using but you need?
Later
Grady