which gearing?

i am not gonna do so much to the engine until later on. for now i got gt-40 heads and 1.7 roller rockers and cold air kit and 24lbs injectors and 80maf, 65mm throttle body bassani header and exhaust, h pipe, msd coil, 6al, stall converter, sn95 cobra upgrade 13" front and baer 13" rear w/cobra caliper, blah blah blah...N/A basically...

do i even need to upgrade the gears? LOL

next year i want supercharger or turbo...more likely turbo

thanks
 
Ok sweet... you running an auto. I see most folks prefer the 4:10s with an auto. Perhaps some of the auto guys will happen by and either confirm or deny that.

Since your mods aren't coming for a while and you'll likely need a new cam for the new combo anyway, you can have that cam cut to suit that combo (including the gearing).

My vote: 4:10s
 
i have cam in there i just have no idea what the hell it is...and he ( 1st owner ) was running NOS. it was basically drag car.i didn't buy the cam so i have no idea what kind or what setting or cut. but it's ideling really rough. sound like boo da da boo da da...LMAO anyways i will go with 4:10's then.

thank man you are always a big help with newbies like me. :)
 
NP man... I would wait for a couple more responses before sending out the order though. I've always been a manual tranny guy so allow a couple of the auto guys to chime in before you buy.
 
hey another Q: how much do you think it will cost me to install all these parts that i am buying....i am getting scared.....brakes to suspension to new heads to intake and repacking the engine(due to rear main seal) to new maf and recalibration and other little stuff....i got all the parts but i am scared of labor!!! help me?
 
Daggar said:
Ummm... would an answer of "LOTS!" be good enoug for ya?

You're looking at about $400 just for the gears.

Id use $400 as a max for price willing to pay.

Gear installation in my area is around 250-300 for a ford 8.8 rearend... prices differ depending on what rearend is being modified. Now, that price is for indiana... Cali will most likely be more expensive.

And Dagger is right... LOTS and LOTS if you are going to hire someone to do ALL the work. It will take a lot of labor hours to convert the car to 5-lug and disc breaks not to mention a nearly complete engine fresh-up. (top-half and rear main). It would be best for you to grab a buddy and a case of beer and see what you two can bolt on by yourselfs. Id focus on doing the top half of the engine yourself and leave the rest for the pros. At least that you can save some money and have the pride of knowing you at least partially built the car and didnt just pay for it ya know?
 
ANYONE WANT TO COME TO MY HOUSE AND INSTALL THESE ??? I WILL PAY AND BUY 24 PACK OF BEER!!!

when i am about to work on my engine...i have cigarette first look at an engine really carefully then i grab my tool box. then i go back inisde the house and jump on the internet to find the local mustang mechanic......................................................LMAO :)


do you think all these installation gonna cost me over $1000 or less then $1000?
 
I dropped in an engine, rebuilt/changed rear end gears and did a fuel pump with EEC change for $1200 NO PARTS INCLUDED. I would say labor only ~$1500-1700 plus parts. Could be ugly dude. I mean if you want the heads/intake set on right, you will pay. Hence do it yourself.......learn something and save some money. Buy a Haynes and a Chilton and go to town.
 
hollywoodstang said:
ANYONE WANT TO COME TO MY HOUSE AND INSTALL THESE ??? I WILL PAY AND BUY 24 PACK OF BEER!!!

when i am about to work on my engine...i have cigarette first look at an engine really carefully then i grab my tool box. then i go back inisde the house and jump on the internet to find the local mustang mechanic......................................................LMAO :)


do you think all these installation gonna cost me over $1000 or less then $1000?

Installation of all those parts will be WAY beyond $1000... trying in the neighborhood of at LEAST 2500 or more
 
If this isnt your daily driver, then why not just try to put the parts on yourself? Its not too hard to do the top end of the engine, just make sure you have new gaskets and try not to twist any bolts. The header bolts are usually the ones to break, but your putting on different heads so as long as you can get the headers off then you should be fine. I would leave the brakes and the gears for a mechanic to do.
Its basically all nuts and bolts man. Then when you have it all on and it works. You can tell people ya I put that on myself.Just my opinion.

-Aaron