Which Gears

[NooSlo50h]

Well i have a 95 Gt with Cobra Upper and Lower intake, and Intake spacer between the upper and lower, Cold air intake,70mm Throtle Body, Pullys,SFI Harmonic Balancer, hortend belt (No A/C or Smog pump), Aluminum Drive Shaft, MSD Distributor, 8mm plug wires, A 155 LPH fuel pump in the gas tank, Full exhaust headers to the tips with a offroad H-pipe, Upper and lower controll arms, lowerd 1.5in front and rear. And i have 275-45 drag radials with 3.73's but i want a higher gear for more pull i just dont know what to go with??

 

[sKyZ]

I have 4.10's in mine.. They r0x0rz!*!@($(%!!!!!!!!!111!!1!!!!one1!!!!

 

[mo_dingo]

yup, 4.10's if you plan to stay N/A. 3.55's if you plan to get a blower.
Scott

 

[95COBRA241]

I'd stick with the 3.73's until you get better flowing heads.

 

[Rootus]

4.56's!



/I love these threads...

 

[GRGT1994]

Don't stress over gears. You already have 3.73. The difference stepping up to 4.10's will be nothing compared to when you stepped up from stock to 3.73. So if you do it, keep your expectations in check, because you might have to strain to notice the difference in SOTP feel.

 

[95riosnake]

6.14's!!!

haha just kidding, I agree with what mo_dingo said

 

[88GT460]

4.30's

Gotta have em with a short throw shifter and an awesome clutch. Which I don't have. but the gears are sweet

 

[loudpedal99]

Don't stress over gears. You already have 3.73. The difference stepping up to 4.10's will be nothing compared to when you stepped up from stock to 3.73. So if you do it, keep your expectations in check, because you might have to strain to notice the difference in SOTP feel.

+1

On a side note, what size is your Smog + A/C delete belt?

 

[Hotrodsun]

3.27 if you are going turbo

 

[NooSlo50h]

+1

On a side note, what size is your Smog + A/C delete belt?

MY belt size for the smog+A/C delete was 812K6

sorry it took so long to respond i havent been near the comp in a while