Who does good work porting/polishing PI heads? In Texas?

Back2Mustangs · Sep 4, 2004

I'm probably buying a 96 GT tomorrow and the guy is giving me a set of '99 PI heads and '99 intake to match. I'm in DFW, TX area, and I was wondering if there was a local 4.6 head-porting guru, or if I should ship them off to someone...And whats the cost to expect?

Also getting aftermarket cams but I haven't seen them yet. I don't think there are many aftermarket cams available yet, so anyone wanna guess at what they might be?

Back2Mustangs · Sep 4, 2004

Have cams...

The car I'm buying in the morning is coming with a set of cams installed on the PI heads(not on the car yet) But he doesn't know what the cams are, just that they are aftermarket. So how much HP can a 4.6 make N/A with ported heads and cams. What is the most I can expect from the best/most porting job and the most awesome cams ??? You can figure in full exhaust and all other supporting mods cuase its gonna have it all. But I want to know what potential lies in this motor, because I can't live with 200RWHP...I'll shoot myself

white99gt · Sep 4, 2004

porting depends on what you want ..On average a good port job with valves and all runs 1200.00 +.

Mine were done by renagade racing in michigan.
Cams you have lots of choices..comp cams(i run a custom set of these),vt engines cams,crane now has some,and crower has some..Bu they are not cheap like 5.0 cams they average 550.00 for the pair ,then you need springs..

white99gt · Sep 4, 2004

Back2Mustangs said:
The car I'm buying in the morning is coming with a set of cams installed on the PI heads(not on the car yet) But he doesn't know what the cams are, just that they are aftermarket. So how much HP can a 4.6 make N/A with ported heads and cams. What is the most I can expect from the best/most porting job and the most awesome cams ??? You can figure in full exhaust and all other supporting mods cuase its gonna have it all. But I want to know what potential lies in this motor, because I can't live with 200RWHP...I'll shoot myself

With the right combo there are guys makeing 360+rwhp n/a ..

streetstang03 · Sep 4, 2004

go register on www.lonestarstangs.com

ask in the DFW forum and you should get plenty of recomendations from stangers who have actually used certain shops and can tell you who does the best work

Who does good work porting/polishing PI heads? In Texas?

Back2Mustangs

New Member

Back2Mustangs

New Member

white99gt

white99gt

streetstang03

unModerator

Similar threads

Who does good work porting/polishing PI heads? In Texas?

Back2Mustangs

New Member

Back2Mustangs

New Member

white99gt

white99gt

streetstang03

unModerator

Similar threads

Privacy & Transparency

Privacy & Transparency