• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Who has Dynomax Ultra Flows??

  • Thread starter Thread starter Venom351R
  • Start date Start date May 27, 2004

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
May 27, 2004
#1
  • May 27, 2004
  • #1
I havent been to the dyno yet since the addition of my Supercharger but Im thinking that my current exhaust setup is going to be my biggest restriction since I keep hearing that SC cars dont like chamberd mufflers. I currently have Flowmaster 2 chambers and if my dyno #'s are less then pleasing then I think I may change cat back systems. I dont want Mangaflow b/c just about everyone in the club is using them and I want something diffrent. My next choice would be Dynomax and there Ultraflow ( stright through design Mufflers). Ive checked mustang exhaust.com and they dont have crap for the dynomax section for a 5.0 w/ ultraflows. So does anyone else have them or know someone that does? Any likes or dislikes about them and anyone know a reasonable priced place to get them? Thanks..

T.M
 
5

5literstang

New Member
Apr 15, 2003
1,374
0
0
Clark, NJ
May 27, 2004
#2
  • May 27, 2004
  • #2
i have em, they sound pretty good, not too loud and doesn't have annoying drone the flows have. put i'm looking for something louder sometime, soomtime soon i'll be goin with the flowpaths.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
May 27, 2004
#3
  • May 27, 2004
  • #3
5literstang said:
i have em, they sound pretty good, not too loud.
Click to expand...


do you remember where you got them and for how much?
 

Killercanary

The car that set the bar.
Founding Member
Nov 29, 1999
5,676
1
76
Altoona, PA
May 27, 2004
#4
  • May 27, 2004
  • #4
I have the welded race magnums which are now called the welded ultra flows. I LOVE them and I think my car sounds KILLER withe them on. I got them from my cousin when he went to a bassani cat back on his car.
 
5

5literstang

New Member
Apr 15, 2003
1,374
0
0
Clark, NJ
May 27, 2004
#5
  • May 27, 2004
  • #5
um i don't remember where i got em from some reason, i think it was a perforamce shop by my house, but i remember paying like 340 for them. i did a little research on mufflers today and i'm gion with the dynomax bullit race mufflers, there a straight threw muffler and should sound awesome!
 
D

DaveB

Founding Member
Jul 13, 2002
637
0
0
Middlesex and Pomona, NJ
May 27, 2004
#6
  • May 27, 2004
  • #6
I have the Ultraflow Stainless catback ($400 from Summit, though when I got it it was $420 ). Overall though, I love the system. They sound killer with my BBK LTs and Dr. Gas offroad X, just IMHO though, though I have heard many people say the same thing. I will admit though, they are a little on the quiet side when you first get them, but believe me, they get a lot louder . They are pretty quiet at cruise and there is no drone on the highway, they are basically just loud when you want them to be.
 

TwinTurbo93

Founding Member
Jan 19, 2002
153
0
0
Orlando
May 27, 2004
#7
  • May 27, 2004
  • #7
I use ultraflows, mine were pretty darn expensive, around $250 for the pair but they are stainless. These things flow like crazy and will work awsome on a supercharged car, LOTS of turbo cars run them as well, they have been proven to make 25+ hp over flowmasters on a turbocharged application. Can't tell you how they sound cause mine is quiet as hell anyways.
 

Venom351R

Founding Member
Apr 27, 2002
4,548
41
98
MAINE
May 27, 2004
#8
  • May 27, 2004
  • #8
Thanks for the feed back guys, they deffently sound like a good choice for a catback system for my paxton. Once I get it dynoed then I will make my decison from there b/c they are $$$.
 

GTPhreak

Founding Member
Mar 16, 2000
5,505
0
77
Rowlett, TEXAS
May 27, 2004
#9
  • May 27, 2004
  • #9
I have them. i got the stainless polished ones and flow tubes for 100 bucks...w00t
 
You must log in or register to reply here.

Similar threads

Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Engine Rocker Noise after Aluminum heads and 1 piece CM Pushrods
  • 79pace
  • Apr 12, 2022
  • Fox 5.0 Mustang Tech
Replies
17
Views
4K
Fox 5.0 Mustang Tech Apr 19, 2022
Monkeybutt2000
M
3
my '00 3.8L has a couple issues, need insight.
  • 305newedge
  • Jul 5, 2021
  • SN95 V6 Mustang Tech
Replies
4
Views
1K
SN95 V6 Mustang Tech Jul 27, 2021
Toofastt
D
Exhaust video
  • DroptopFab916
  • Apr 10, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
698
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 10, 2020
JD1964
Who Here Has Fit Their Own Universal Midpipe? Looking For Opinions
  • killer5.0
  • Feb 8, 2018
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 13, 2018
srtthis
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?